Hi. Would anybody be so nice to give me an overview of the current status of the PIC32 support?
I tried to flash a PIC32MX220F032B using a FT2232 based JTAG programmer (PicoTAP). The version I used was openocd-0.6.0-dev-120229143915 for Windows. I was able to get contact to the MCU, I can read, erase, erase check. But when I started flashing, it took several hours for 12k of code, and afterwards the code was shifted by ~10 bytes. Also I have some additional questions: Do I have to connect the /MCLR pin of PIC32? It seems to work without, but if I understand the PIC32 flash programming specification right, it is needed. So, to what should it be connected? To trst or srst? Does OOCD use the microchip "Programming Executive", or the direct method? There's a flash loader assembler file (\contrib\loaders\flashpic32mx.s). What is it good for? Exactly what files do I have to edit/add to support the PicoTAP pgrogrammer? PicoTAP is an open design (http://www.gojtag.com/downloads). It's main goal is to provide a simple JTAG interface for demonstrating and learning bundary scan. Goepel gave them away for free last year, that's why I have one. Thanks Uhrheber ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
