On 19 March 2012 16:09, Spencer Oliver <s...@spen-soft.co.uk> wrote: > On 16 March 2012 19:10, Spencer Oliver <s...@spen-soft.co.uk> wrote: >> On Mar 16, 2012 6:32 PM, "Freddie Chopin" <freddie_cho...@op.pl> wrote: >>> >>> Hi! >>> >>> I'm using OpenOCD that is about 2 weeks old, and there is a small >>> problem with ST-LINK: >>> >>> > >openocd-x64-0.6.0-dev-120229143915 -f board/stm32f4discovery.cfg >>> > Open On-Chip Debugger 0.6.0-dev-00448-gc59a441 (2012-02-29-17:10) >>> > Licensed under GNU GPL v2 >>> > For bug reports, read >>> > http://openocd.sourceforge.net/doc/doxygen/bugs.html >>> > Warn : must select a transport. >>> > 1 kHz >>> > trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain >>> > Info : clock speed 1 kHz >>> > Info : IDCODE 2ba01477 >>> > Info : stm32f4x.cpu: hardware has 6 breakpoints, 4 watchpoints >>> >>> I'm talking about the warning which is somewhat premature, as later the >>> transport is selected, everything works fine etc. >>> >>> The warning is generated on this line in stlink-v2.cfg: >>> >>> > interface stlink >>> >>> (that's the first line of this script). >>> >>> Any ideas? >>> >> Its is a bug I have have on my todo list. >> It causes no functional issues. >> > > Seems this warning is outputted for all interfaces that declare more > than one transport, currently stlink and vsllink. > Looking at the code the intention was to stop config error's. >
http://openocd.zylin.com/532 ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
