2012/3/19 Robert Jarzmik <robert.jarz...@free.fr>: > Franck Jullien <franck.jull...@gmail.com> writes: >> 2012/3/18 Robert Jarzmik <robert.jarz...@free.fr>: >>> usb_blaster pin6 1 >>> usb_blaster pin8 1 >>> source [find target/pxa270.cfg] >>> >>> The lines "usb_blaster pinX 1" are the important ones. If that doesn't >>> improve >> >> This is much better :) It works, great job ! > > Ah, great. The reason should be that pin6 (or pin8) of your USB-Blaster is > tied > to pin nTRST of your TAP, and therefore kept your TAP into an infinite reset > state. > > As you didn't have that behaviour before, I must conclude that the previous > driver's default was to put pins 6 and 8 to a high logical state. That seems > logical, as most people will tie pins 6 and 8 to nTRST and nSRST. > > I wonder if I should put that as a default in the driver, or maybe in the > altera > default configuration file (altera-usb-blaster.cfg). Any thoughts on this, > Franck, Spencer ? > > Cheers. > > -- > Robert > > PS: I know your involvement in barebox too :)
I'd vote for the altera default configuration file (with some comments, like you did above). ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
