Hi! Would you care to make and test a config file for my ftdi driver, still in gerrit, in addition to the ft2232 patch? It should be straight forward and very similar to configs for other adapters that lack "extra" signals. The full patchset can be checked out (from within an existing clone) with git fetch http://openocd.zylin.com/p/openocd refs/changes/35/535/1 && git checkout FETCH_HEAD along with config files for all other ftdi based adapters (located in the tcl/interface/ftdi/ subdirectory). Pass --enable-ftdi to configure to enable the driver, which requires libusb-1.0.
Regards, Andreas On Tue, Apr 10, 2012 at 5:33 PM, <[email protected]> wrote: > This is an automated email from Gerrit. > > Stéphane Bonnet ([email protected]) just uploaded a new patch set to > Gerrit, which you can find at http://openocd.zylin.com/562 > > -- gerrit > > commit 2e37930ae9e7d8ef2c077f8cf02da6cdc4c2f90a > Author: Stephane Bonnet <[email protected]> > Date: Tue Apr 10 17:22:44 2012 +0200 > > ft2232: Support for Digilent HS1 USB adapter > > * Added support to the FT2232 driver for the FT2232H-based > Digilent HS1 adapter. It does not support reset signals, > so there is no digilent_hs1_reset function. > > Change-Id: If1a43c73711709285ffba8c9c22431df4497a59f > Signed-off-by: Stephane Bonnet <[email protected]> > ------------------------------------------------------------------------------ Better than sec? Nothing is better than sec when it comes to monitoring Big Data applications. Try Boundary one-second resolution app monitoring today. Free. http://p.sf.net/sfu/Boundary-dev2dev _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
