Hello there.
The other day I stumbled over a program called "TopJTAG Probe" which has a 20
day trial period.
This is a simple graphical "boundary scan" tool that enables you to toggle/read
any pin of any BS enabled device as long as you have a simple(supported) JTAG
dongle and the device supporting BSDL file.
Starting this tool and googling the BSDL file for pin description gave me the
desired functionality. I could set pin #1 high or low on my STM32F100, and
measure it with a multimeter. I was familiar with the tool in less than 5
minutes - PERFECT!
Now I want to do the same with OpenOCD as I would like to introduce it in our
production as part of a test sequence.
Does anyone know how to simply specify the SVF test vector of a given BS device
and the pass it to OpenOCD e.g only setting one pin high and three-stating the
rest?
Is there some documents on this? Or some tool?
Thanks I advance:-) Flemming
Med venlig hilsen/Best regards
Flemming Futtrup
DEIF A/S
Development engineer, SW platform
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
