Hi! Would OpenOCD (with "old" driver or new ftdi/mpsse driver by Andreas) work with FT232H the same as with FT2232? According do FTDI's website FT232H is a Hi-Speed device with single MPSSE channel, so it would be a better option for cheaper JTAG adapters without UART (it's like 40% cheaper than FT2232) http://www.ftdichip.com/Products/ICs/FT232H.htm
The only difference I see is that it has "1kB RX/TX buffer per channel", while FT2232H has 4kB, but still FT2232D had a lot less than 512B, so I don't think it's an issue here... http://www.ftdichip.com/Products/ICs.htm (table at the bottom) Thx for your opinions (; 4\/3!! ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
