This is an automated email from Gerrit. Freddie Chopin ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/750
-- gerrit commit 34c22af493509718eac7d4e217d77af7e035a2cf Author: Freddie Chopin <[email protected]> Date: Thu Jul 19 09:32:04 2012 +0200 cfg: Add config file variants using the ftdi driver instead of ft2232 part 2 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <[email protected]> Signed-off-by: Freddie Chopin <[email protected]> diff --git a/tcl/interface/ftdi/axm0432.cfg b/tcl/interface/ftdi/axm0432.cfg new file mode 100644 index 0000000..0c24a33 --- /dev/null +++ b/tcl/interface/ftdi/axm0432.cfg @@ -0,0 +1,18 @@ +# +# Axiom axm0432 +# +# http://www.axman.com +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Symphony SoundBite" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0c08 0x0c2b +ftdi_layout_signal nTRST -data 0x0800 +ftdi_layout_signal nSRST -data 0x0400 diff --git a/tcl/interface/ftdi/calao-usb-a9260-c01.cfg b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg new file mode 100644 index 0000000..88d6732 --- /dev/null +++ b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg @@ -0,0 +1,21 @@ +# +# CALAO Systems USB-A9260-C01 +# +# http://www.calao-systems.com/ +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "USB-A9260" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 + +script interface/calao-usb-a9260.cfg +script target/at91sam9260minimal.cfg diff --git a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg new file mode 100644 index 0000000..21e81be --- /dev/null +++ b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg @@ -0,0 +1,21 @@ +# +# CALAO Systems USB-A9260-C02 +# +# http://www.calao-systems.com/ +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "USB-A9260" +ftdi_vid_pid 0x0403 0x6001 + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 + +script interface/calao-usb-a9260.cfg +script target/at91sam9260minimal.cfg diff --git a/tcl/interface/ftdi/cortino.cfg b/tcl/interface/ftdi/cortino.cfg new file mode 100644 index 0000000..d4f83f1 --- /dev/null +++ b/tcl/interface/ftdi/cortino.cfg @@ -0,0 +1,18 @@ +# +# Hitex Cortino +# +# http://www.hitex.com/index.php?id=cortino +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Cortino" +ftdi_vid_pid 0x0640 0x0032 + +ftdi_layout_init 0x0308 0x031b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/dlp-usb1232h.cfg b/tcl/interface/ftdi/dlp-usb1232h.cfg new file mode 100644 index 0000000..8eaa41d --- /dev/null +++ b/tcl/interface/ftdi/dlp-usb1232h.cfg @@ -0,0 +1,21 @@ +# +# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module +# +# http://www.dlpdesign.com/usb/usb1232h.shtml +# +# Schematics for OpenOCD usage: +# http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Dual RS232-HS" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0008 0x000b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 diff --git a/tcl/interface/ftdi/dp_busblaster.cfg b/tcl/interface/ftdi/dp_busblaster.cfg new file mode 100644 index 0000000..8f6e324 --- /dev/null +++ b/tcl/interface/ftdi/dp_busblaster.cfg @@ -0,0 +1,22 @@ +# +# Dangerous Prototypes - Bus Blaster +# +# The Bus Blaster has a configurable buffer between the FTDI ftdiH and the +# JTAG header which allows it to emulate various debugger types. It comes +# configured as a JTAGkey device. +# +# http://dangerousprototypes.com/docs/Bus_Blaster +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Dual RS232-HS" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/flossjtag-noeeprom.cfg b/tcl/interface/ftdi/flossjtag-noeeprom.cfg new file mode 100644 index 0000000..18046e7 --- /dev/null +++ b/tcl/interface/ftdi/flossjtag-noeeprom.cfg @@ -0,0 +1,26 @@ +# +# FlossJTAG +# +# http://github.com/esden/floss-jtag +# +# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used +# for newer versions of Floss-JTAG with empty or not populated EEPROM. If you +# have several Floss-JTAG connected you have to use the USB ID to select a +# specific one. +# +# If you have a Floss-JTAG WITH EEPROM that is programmed, use the +# flossjtag.cfg file. +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Dual RS232-HS" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0008 0x000b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 diff --git a/tcl/interface/ftdi/flossjtag.cfg b/tcl/interface/ftdi/flossjtag.cfg new file mode 100644 index 0000000..13e1f0b --- /dev/null +++ b/tcl/interface/ftdi/flossjtag.cfg @@ -0,0 +1,29 @@ +# +# FlossJTAG +# +# http://github.com/esden/floss-jtag +# +# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the +# existence of an EEPROM on Floss-JTAG containing a name. If you have several +# Floss-JTAG adapters connected you can use the serial number to select a +# specific device. +# +# If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the +# flossjtag-noeeprom.cfg file. +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_vid_pid 0x0403 0x6010 +ftdi_device_desc "FLOSS-JTAG" +#ftdi_serial "FJ000001" + +ftdi_layout_init 0x0008 0x180b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi_layout_signal LED -data 0x0800 +ftdi_layout_signal LED2 -data 0x1000 diff --git a/tcl/interface/ftdi/flyswatter.cfg b/tcl/interface/ftdi/flyswatter.cfg new file mode 100644 index 0000000..29726d9 --- /dev/null +++ b/tcl/interface/ftdi/flyswatter.cfg @@ -0,0 +1,19 @@ +# +# TinCanTools Flyswatter +# +# http://www.tincantools.com/product.php?productid=16134 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Flyswatter" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0818 0x0c7b +ftdi_layout_signal nTRST -data 0x0010 +ftdi_layout_signal nSRST -ndata 0x0020 +ftdi_layout_signal LED -data 0x0c00 diff --git a/tcl/interface/ftdi/flyswatter2.cfg b/tcl/interface/ftdi/flyswatter2.cfg new file mode 100644 index 0000000..bf58ccc --- /dev/null +++ b/tcl/interface/ftdi/flyswatter2.cfg @@ -0,0 +1,19 @@ +# +# TinCanTools Flyswatter 2 +# +# http://www.tincantools.com/product.php?productid=16134 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Flyswatter2" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0818 0x017b +ftdi_layout_signal nTRST -data 0x0010 +ftdi_layout_signal nSRST -data 0x0020 +ftdi_layout_signal LED -data 0x0400 diff --git a/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg new file mode 100644 index 0000000..b682333 --- /dev/null +++ b/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg @@ -0,0 +1,18 @@ +# +# Hilscher NXHX 10-ETM +# +# http://de.hilscher.com/products_details_hardware.html?p_id=P_4ce145a5983e6 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "NXHX 10-ETM" +ftdi_vid_pid 0x0640 0x0028 + +ftdi_layout_init 0x0308 0x030b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg new file mode 100644 index 0000000..3483030 --- /dev/null +++ b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg @@ -0,0 +1,18 @@ +# +# Hilscher NXHX 500-ETM +# +# http://de.hilscher.com/files_design/8/NXHX500-ETM_description_Rev01_EN.pdf +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "NXHX 500-ETM" +ftdi_vid_pid 0x0640 0x0028 + +ftdi_layout_init 0x0308 0x030b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg new file mode 100644 index 0000000..b4cada0 --- /dev/null +++ b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg @@ -0,0 +1,18 @@ +# +# Hilscher NXHX 500-RE +# +# http://de.hilscher.com/products_details_hardware.html?p_id=P_461ff2053bad1&bs=20 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "NXHX 500-RE" +ftdi_vid_pid 0x0640 0x0028 + +ftdi_layout_init 0x0308 0x030b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg new file mode 100644 index 0000000..67074a2 --- /dev/null +++ b/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg @@ -0,0 +1,18 @@ +# +# Hilscher NXHX 50-ETM +# +# http://de.hilscher.com/files_design/8/NXHX50-ETM_description_Rev01_EN.pdf +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "NXHX 50-ETM" +ftdi_vid_pid 0x0640 0x0028 + +ftdi_layout_init 0x0308 0x030b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hilscher_nxhx50_re.cfg b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg new file mode 100644 index 0000000..966dcd8 --- /dev/null +++ b/tcl/interface/ftdi/hilscher_nxhx50_re.cfg @@ -0,0 +1,18 @@ +# +# Hilscher NXHX 50-RE +# +# http://de.hilscher.com/products_details_hardware.html?p_id=P_483c0f582ad36&bs=20 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "NXHX50-RE" +ftdi_vid_pid 0x0640 0x0028 + +ftdi_layout_init 0x0308 0x030b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/hitex_str9-comstick.cfg b/tcl/interface/ftdi/hitex_str9-comstick.cfg new file mode 100644 index 0000000..f589381 --- /dev/null +++ b/tcl/interface/ftdi/hitex_str9-comstick.cfg @@ -0,0 +1,18 @@ +# +# Hitex STR9-comStick +# +# http://www.hitex.com/index.php?id=383 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "STR9-comStick" +ftdi_vid_pid 0x0640 0x002c + +ftdi_layout_init 0x0308 0x030b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0200 diff --git a/tcl/interface/ftdi/icebear.cfg b/tcl/interface/ftdi/icebear.cfg new file mode 100644 index 0000000..2c03d41 --- /dev/null +++ b/tcl/interface/ftdi/icebear.cfg @@ -0,0 +1,18 @@ +# +# Section5 ICEBear +# +# http://section5.ch/icebear +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "ICEbear JTAG adapter" +ftdi_vid_pid 0x0403 0xc140 + +ftdi_layout_init 0x0028 0x002b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0020 diff --git a/tcl/interface/ftdi/lisa-l.cfg b/tcl/interface/ftdi/lisa-l.cfg new file mode 100644 index 0000000..35b22bf --- /dev/null +++ b/tcl/interface/ftdi/lisa-l.cfg @@ -0,0 +1,20 @@ +# +# Lisa/L +# +# http://paparazzi.enac.fr/wiki/Lisa +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Lisa/L" +ftdi_vid_pid 0x0403 0x6010 +ftdi_channel 1 + +ftdi_layout_init 0x0008 0x180b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040 +ftdi_layout_signal LED -data 0x1800 diff --git a/tcl/interface/ftdi/luminary-icdi.cfg b/tcl/interface/ftdi/luminary-icdi.cfg new file mode 100644 index 0000000..fe548b2 --- /dev/null +++ b/tcl/interface/ftdi/luminary-icdi.cfg @@ -0,0 +1,28 @@ +# +# Luminary Micro Stellaris LM3S9B9x Evaluation Kits +# In-Circuit Debug Interface (ICDI) Board +# +# Essentially all Luminary debug hardware is the same, (with both +# JTAG and SWD support compatible with ICDI boards. This ICDI adapter +# configuration is JTAG-only, but the same hardware handles SWD too. +# +# This is a discrete ftdi based debug board which supports ARM's +# JTAG/SWD connectors in both backwards-compatible 20-pin format and +# in the new-style compact 10-pin. There's also an 8-pin connector +# with serial port support. It's included with LM3S9B9x eval boards. +# +# http://www.luminarymicro.com/products/ek-lm3s9b90.html +# http://www.luminarymicro.com/products/ek-lm3s9b92.html +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Luminary Micro ICDI Board" +ftdi_vid_pid 0x0403 0xbcda + +ftdi_layout_init 0x0088 0x00cb +ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 diff --git a/tcl/interface/ftdi/luminary-lm3s811.cfg b/tcl/interface/ftdi/luminary-lm3s811.cfg new file mode 100644 index 0000000..232ba03 --- /dev/null +++ b/tcl/interface/ftdi/luminary-lm3s811.cfg @@ -0,0 +1,24 @@ +# +# Luminary Micro Stellaris LM3S811 Evaluation Kit +# +# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html +# +# NOTE: this is only for boards *before* Rev C, which adds support +# for SWO tracing with ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN signals. +# The "evb_lm3s811" layout doesn't set up those signals. +# +# Rev C boards work more like the other Stellaris eval boards. They +# need to use the "luminary_icdi" layout to work correctly. +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "LM3S811 Evaluation Board" +ftdi_vid_pid 0x0403 0xbcd9 + +ftdi_layout_init 0x0088 0x008b +ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 diff --git a/tcl/interface/ftdi/luminary.cfg b/tcl/interface/ftdi/luminary.cfg new file mode 100644 index 0000000..88ea2d7 --- /dev/null +++ b/tcl/interface/ftdi/luminary.cfg @@ -0,0 +1,37 @@ +# +# Luminary Micro Stellaris Evaluation Kits +# +# http://www.luminarymicro.com/products/evaluation_kits.html +# +# There are a number of evaluation kits for Stellaris Cortex-M3 chips. +# Currently they all bundle ftdi based debug support. When that is +# used (instead of an external adapter), use this config file in one +# of these two modes: +# +# - Eval board debug ... debug of the Stellaris chip via port A. +# +# - Other board debug ... same thing, but the board acts as a debug +# adapter for another board (using a standard ARM JTAG connector). +# The Stellaris chip stays in reset. +# +# Those support both JTAG and SWD. SWD is an ARM-only two-wire debug +# protocol; in 2009, OpenOCD does not support SWD. +# +# Port B of the ftdi chip is normally used as a serial link to the +# Stellaris chip. On most boards (but not older LM3S811 eval boards), +# when SWD is used Port B may instead be used to read low-bandwidth +# "SWO trace" data, including so-called "printf style" output from +# firmware via the ITM module as well as profile data. +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Stellaris Evaluation Board" +ftdi_vid_pid 0x0403 0xbcd9 + +ftdi_layout_init 0x00a8 0x00eb +ftdi_layout_signal nSRST -data 0x0020 diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg new file mode 100644 index 0000000..1aa4cd0 --- /dev/null +++ b/tcl/interface/ftdi/minimodule.cfg @@ -0,0 +1,17 @@ +# +# FTDI MiniModule +# +# http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_ftdiH_Mini_Module.pdf +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "ftdiH MiniModule" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0018 0x05fb +ftdi_layout_signal nSRST -data 0x0020 diff --git a/tcl/interface/ftdi/neodb.cfg b/tcl/interface/ftdi/neodb.cfg new file mode 100644 index 0000000..7582248 --- /dev/null +++ b/tcl/interface/ftdi/neodb.cfg @@ -0,0 +1,18 @@ +# +# Openmoko USB JTAG/RS232 adapter +# +# http://wiki.openmoko.org/wiki/Debug_Board_v3 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Debug Board for Neo1973" +ftdi_vid_pid 0x1457 0x5118 + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800 diff --git a/tcl/interface/ftdi/ngxtech.cfg b/tcl/interface/ftdi/ngxtech.cfg new file mode 100644 index 0000000..354183e --- /dev/null +++ b/tcl/interface/ftdi/ngxtech.cfg @@ -0,0 +1,18 @@ +# +# NGX ARM USB JTAG +# +# http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "NGX JTAG A" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0508 0x0f1b +ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg new file mode 100644 index 0000000..aca42db --- /dev/null +++ b/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg @@ -0,0 +1,19 @@ +# +# Olimex ARM-USB-OCD-H +# +# http://www.olimex.com/dev/arm-usb-ocd-h.html +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H" +ftdi_vid_pid 0x15ba 0x002b + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nSRST -oe 0x0200 +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg b/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg new file mode 100644 index 0000000..78b72cd --- /dev/null +++ b/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg @@ -0,0 +1,19 @@ +# +# Olimex ARM-USB-OCD +# +# http://www.olimex.com/dev/arm-usb-ocd.html +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Olimex OpenOCD JTAG" +ftdi_vid_pid 0x15ba 0x0003 + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nSRST -oe 0x0200 +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg new file mode 100644 index 0000000..4bc8b7b --- /dev/null +++ b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg @@ -0,0 +1,19 @@ +# +# Olimex ARM-USB-TINY-H +# +# http://www.olimex.com/dev/arm-usb-tiny-h.html +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H" +ftdi_vid_pid 0x15ba 0x002a + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nSRST -oe 0x0200 +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/olimex-jtag-tiny.cfg b/tcl/interface/ftdi/olimex-jtag-tiny.cfg new file mode 100644 index 0000000..bea3842 --- /dev/null +++ b/tcl/interface/ftdi/olimex-jtag-tiny.cfg @@ -0,0 +1,19 @@ +# +# Olimex ARM-USB-TINY +# +# http://www.olimex.com/dev/arm-usb-tiny.html +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Olimex OpenOCD JTAG TINY" +ftdi_vid_pid 0x15ba 0x0004 + +ftdi_layout_init 0x0c08 0x0f1b +ftdi_layout_signal nSRST -oe 0x0200 +ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400 +ftdi_layout_signal LED -data 0x0800 diff --git a/tcl/interface/ftdi/oocdlink.cfg b/tcl/interface/ftdi/oocdlink.cfg new file mode 100644 index 0000000..8c213eb --- /dev/null +++ b/tcl/interface/ftdi/oocdlink.cfg @@ -0,0 +1,18 @@ +# +# Joern Kaipf's OOCDLink +# +# http://www.joernonline.de/contrexx2/cms/index.php?page=126 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "OOCDLink" +ftdi_vid_pid 0x0403 0xbaf8 + +ftdi_layout_init 0x0508 0x0f1b +ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/openrd.cfg b/tcl/interface/ftdi/openrd.cfg new file mode 100644 index 0000000..c94af80 --- /dev/null +++ b/tcl/interface/ftdi/openrd.cfg @@ -0,0 +1,18 @@ +# +# Marvell OpenRD +# +# http://www.marvell.com/products/embedded_processors/developer/kirkwood/openrd.jsp +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "OpenRD JTAGKey ftdiD B" +ftdi_vid_pid 0x0403 0x9e90 + +ftdi_layout_init 0x0608 0x0f1b +ftdi_layout_signal nTRST -data 0x0200 +ftdi_layout_signal nSRST -noe 0x0400 diff --git a/tcl/interface/ftdi/redbee-econotag.cfg b/tcl/interface/ftdi/redbee-econotag.cfg new file mode 100644 index 0000000..228cec3 --- /dev/null +++ b/tcl/interface/ftdi/redbee-econotag.cfg @@ -0,0 +1,21 @@ +# +# Redwire Redbee-Econotag +# +# http://www.redwirellc.com/store/node/1 +# +# The Redbee-Econotag has an onboard ftdiH with: +# - ftdiH channel A wired to mc13224v JTAG +# - ftdiH channel B wired to mc13224v UART1 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0c08 0x0c2b +ftdi_layout_signal nTRST -data 0x0800 +ftdi_layout_signal nSRST -data 0x0400 diff --git a/tcl/interface/ftdi/redbee-usb.cfg b/tcl/interface/ftdi/redbee-usb.cfg new file mode 100644 index 0000000..34392e5 --- /dev/null +++ b/tcl/interface/ftdi/redbee-usb.cfg @@ -0,0 +1,22 @@ +# +# Redwire Redbee-USB +# +# http://www.redwirellc.com +# +# The Redbee-USB has an onboard ftdiH with: +# - ftdiH channel B wired to mc13224v JTAG +# - ftdiH channel A wired to mc13224v UART1 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_vid_pid 0x0403 0x6010 +ftdi_channel 1 + +ftdi_layout_init 0x0c08 0x0c2b +ftdi_layout_signal nTRST -data 0x0800 +ftdi_layout_signal nSRST -data 0x0400 diff --git a/tcl/interface/ftdi/sheevaplug.cfg b/tcl/interface/ftdi/sheevaplug.cfg new file mode 100644 index 0000000..c31e64d --- /dev/null +++ b/tcl/interface/ftdi/sheevaplug.cfg @@ -0,0 +1,18 @@ +# +# Marvel SheevaPlug Development Kit +# +# http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "SheevaPlug JTAGKey ftdiD B" +ftdi_vid_pid 0x9e88 0x9e8f + +ftdi_layout_init 0x0608 0x0f1b +ftdi_layout_signal nTRST -data 0x0200 +ftdi_layout_signal nSRST -noe 0x0400 diff --git a/tcl/interface/ftdi/signalyzer-lite.cfg b/tcl/interface/ftdi/signalyzer-lite.cfg new file mode 100644 index 0000000..4988a3b --- /dev/null +++ b/tcl/interface/ftdi/signalyzer-lite.cfg @@ -0,0 +1,18 @@ +# +# Xverve Signalyzer LITE (DT-USB-SLITE) +# +# http://www.signalyzer.com +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Signalyzer LITE" +ftdi_vid_pid 0x0403 0xbca1 + +ftdi_layout_init 0x0008 0x000b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 diff --git a/tcl/interface/ftdi/signalyzer.cfg b/tcl/interface/ftdi/signalyzer.cfg new file mode 100644 index 0000000..e2629be --- /dev/null +++ b/tcl/interface/ftdi/signalyzer.cfg @@ -0,0 +1,18 @@ +# +# Xverve Signalyzer Tool (DT-USB-ST) +# +# http://www.signalyzer.com +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Signalyzer" +ftdi_vid_pid 0x0403 0xbca0 + +ftdi_layout_init 0x0008 0x000b +ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010 +ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 diff --git a/tcl/interface/ftdi/stm32-stick.cfg b/tcl/interface/ftdi/stm32-stick.cfg new file mode 100644 index 0000000..86280a8 --- /dev/null +++ b/tcl/interface/ftdi/stm32-stick.cfg @@ -0,0 +1,18 @@ +# +# Hitex STM32-PerformanceStick +# +# http://www.hitex.com/index.php?id=340 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "STM32-PerformanceStick" +ftdi_vid_pid 0x0640 0x002d + +ftdi_layout_init 0x0188 0x038b +ftdi_layout_signal nTRST -data 0x0100 +ftdi_layout_signal nSRST -data 0x0080 diff --git a/tcl/interface/ftdi/turtelizer2.cfg b/tcl/interface/ftdi/turtelizer2.cfg new file mode 100644 index 0000000..e27542e --- /dev/null +++ b/tcl/interface/ftdi/turtelizer2.cfg @@ -0,0 +1,18 @@ +# +# egnite Turtelizer 2 +# +# http://www.ethernut.de/en/hardware/turtelizer/index.html +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Turtelizer JTAG/RS232 Adapter" +ftdi_vid_pid 0x0403 0xbdc8 + +ftdi_layout_init 0x0008 0x0c5b +ftdi_layout_signal nSRST -data 0x0040 +ftdi_layout_signal LED -data 0x0c00 diff --git a/tcl/interface/ftdi/vpaclink.cfg b/tcl/interface/ftdi/vpaclink.cfg new file mode 100644 index 0000000..85c16f9 --- /dev/null +++ b/tcl/interface/ftdi/vpaclink.cfg @@ -0,0 +1,18 @@ +# +# Voipac VPACLink +# +# http://voipac.com/27M-JTG-000 +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "VPACLink A" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0508 0x0f1b +ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100 +ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400 diff --git a/tcl/interface/ftdi/xds100v2.cfg b/tcl/interface/ftdi/xds100v2.cfg new file mode 100644 index 0000000..fd0cc0e --- /dev/null +++ b/tcl/interface/ftdi/xds100v2.cfg @@ -0,0 +1,23 @@ +# +# Texas Instruments XDS100v2 +# +# http://processors.wiki.ti.com/index.php/XDS100#XDS100v2_Features +# + +echo "WARNING!" +echo "This file was not tested with real interface, it is based on code in ft2232.c." +echo "Please report your experience with this file to openocd-devel mailing list," +echo "so it could be marked as working or fixed." + +interface ftdi +ftdi_device_desc "Texas Instruments Inc.XDS100 Ver 2.0" +ftdi_vid_pid 0x0403 0xa6d0 + +ftdi_layout_init 0x0838 0x597b +ftdi_layout_signal nTRST -data 0x0010 +ftdi_layout_signal nSRST -oe 0x0100 +ftdi_layout_signal nEMU_EN -data 0x0020 +ftdi_layout_signal nEMU0 -data 0x0040 +ftdi_layout_signal nEMU1 -data 0x1000 +ftdi_layout_signal PWR_RST -data 0x0800 +ftdi_layout_signal LOOPBACK -data 0x4000 -- ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
