Hello all!
I have a TI dm355evm board and xds100v2 JTAG
emulator. I'am trying to make them work together with OpenOCD 0.6.0-rc2.
It seemed very simple due to cfg-files provided, but actually it was
not.
When I've tried to launch OCD with
openocd.exe -f interface/xds100v2.cfg -f board/dm355evm.cfgit reports a error
Info : only one transport option; autoselect 'jtag'
RCLK - adaptive
fast memory access is enabled
dcc downloads are enabled
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
Info : max TCK change to: 30000 kHz
Info : RCLK (adaptive clock speed)
Info : JTAG tap: dm355.jrc tap/device found: 0x0b73b02f (mfg: 0x017, part:
0xb73b, ver: 0x0)
Info : JTAG tap: dm355.etb enabled
Info : JTAG tap: dm355.arm enabled
Info : Embedded ICE version 0
Error: unknown EmbeddedICE version (comms ctrl: 0x00000000)
Info : dm355.arm: hardware has 2 breakpoint/watchpoint units
Info : ETM v1.0In spite of report the GDB-server starts, bud does not allow to
do anything. On reset init command it returns:
TARGET:dm355.arm - Not haltedI've asked Google. As far as I could understand
the error unknown EmbeddedICE version (comms ctrl: 0x00000000) can have several
different causes. And also I have not found that
someone faced this problem with the same set of hardware as me.
Please help me to find the root of the problem. Thank you in advance.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
