Thanks Andreas,
Can you explain how can I use on discovery board's STLINKV2 to
debug another board.
I mean setting of jumpers and connections
Regards,
Jaydip.
-----Original Message-----
From: andr...@fritiofson.net [mailto:andr...@fritiofson.net] On Behalf Of
Andreas Fritiofson
Sent: Friday, October 12, 2012 7:43 PM
To: Jonathan Dumaresq
Cc: jaydip aghera; openocd-devel@lists.sourceforge.net
Subject: Re: [OpenOCD-devel] SWD fails onOpenocd
0.6.1/j-link/STM32F4Discovery
On Fri, Oct 12, 2012 at 4:00 PM, Jonathan Dumaresq
<jdumar...@cimeq.qc.ca> wrote:
> andr...@fritiofson.net wrote:
>> On Fri, Oct 12, 2012 at 8:18 AM, jaydip aghera
>> <jaydip.agh...@swaytech.in> wrote:
>>> Hi everyone,
>>>
>>> Thanks jonathan ,
>>>
>>> stm32f4-discovery board has STM32407-VGT6 .
>>> We want to make custom board using STM32F407-VGt6. And we
>>> have j-link(segger).
>>>
>>> To do this , I have to not use on board STLINKV2.
>>
>> But you can use the discovery board's STLINKV2 to debug another board.
>> You just have to set the right jumpers and connect a suitable cable.
>>
>> /Andreas
>
> Or you can get one STLINKV2 for 25$ at digikey.
>
> 497-10484-ND
>
Or you can get one STLINKV2 for $15 at digikey. Order now and we'll
throw in a STM32F4 eval board at no extra cost!
497-11455-ND
I don't know, maybe it's crippled compared to the standalone version.
Also there's no case.
/Andreas
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
