On Wed, Nov 28, 2012 at 11:31 PM, Akos Vandra <[email protected]> wrote: > Just started testing your code. Looks promising :)
Cool, thanks for your support! :-) > SWD seems to be working - even though extremely slowly. When resuming the > execution, the resume does not happen only after polling the target again, > manually. It will probably have something to do with the delayed mdw > operations, becuase the resume happens if I do an "mrd 0x00000000" as well. Yes, the USB boottleneck is the issue here, but we will solve it soon, maybe, somehow :-) > Reset commands are probably not implemented, but soft_reset_halt is working, > and I was able to reset the processor with it. The new way to drive interface signals is the "interface_signal" and "interface_bitbang" commands (see help for usage). You can define SRST port signal _mask_ and with interface_signal then read/write it with interface_bitbang. I need to modify existing reset handling to work with interface not jtag and it should be fine, for now you can drive signals by hand :-) When its done I will make these commands an interface subset. Please note that signal/bitbang also creates new possibilities to write TCL scripts for unsupported protocols or some specific signal sequences on the interface :-) Thanks for your input! :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info ------------------------------------------------------------------------------ Keep yourself connected to Go Parallel: VERIFY Test and improve your parallel project with help from experts and peers. http://goparallel.sourceforge.net _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
