Hi, Am 28.11.2012 21:39, schrieb Akos Vandra:
> I've recently updated to openocd head. [...] > > I used the same gdb script for a while now, and it was working > flawlessly. Has something changed in openocd? Is my gdb script > "not-quite-correct"? It appears so. > I tried with the one I have been using (I hacked this together some time > ago, without too much knowledge about openocd and gdb, and such, but it > was working, so "if it works don't touch it") > > set arm abi AAPCS > target remote localhost:3333 > poll > monitor halt > monitor soft_reset_halt "soft_reset_halt" does not work well on LPC1768 for me. You likely want "monitor reset halt" or "monitor reset init". Use the latter for flashing firmware to the chip. Care must be taken for the settings to "reset_config" to match the actual hardware resets connections. > break main I use "thbreak main" for this. > continue -- J. Fischer ------------------------------------------------------------------------------ Keep yourself connected to Go Parallel: TUNE You got it built. Now make it sing. Tune shows you how. http://goparallel.sourceforge.net _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
