I'm using openOCD with a flyswatter3 probe on a PIC32 USB starter Kit II under gdb trying to "load" a program that's being written to flash but the flash programming doesn't seem to work. (gdb) load leds.hex Loading section .sec1, size 0x124 lma 0x1fc00000 Loading section .sec2, size 0x10 lma 0x1fc02ff0 Error finishing flash operation
The erase works and after the load fails reading memory shows nothing was written to flash. Gdb does know this is flash and is using the RPC flash commands: (gdb) info mem Using memory regions provided by the target. Num Enb Low Addr High Addr Attrs 0 y 0x00000000 0x1d000000 rw nocache 1 y 0x1d000000 0x1d080000 flash blocksize 0x1000 nocache 2 y 0x1d080000 0x1fc00000 rw nocache 3 y 0x1fc00000 0x1fc03000 flash blocksize 0x1000 nocache 4 y 0x1fc03000 0x9d000000 rw nocache 5 y 0x9d000000 0x9d080000 flash blocksize 0x1000 nocache 6 y 0x9d080000 0x9fc00000 rw nocache 7 y 0x9fc00000 0x9fc03000 flash blocksize 0x1000 nocache 8 y 0x9fc03000 0xbd000000 rw nocache 9 y 0xbd000000 0xbd080000 flash blocksize 0x1000 nocache 10 y 0xbd080000 0xbfc00000 rw nocache 11 y 0xbfc00000 0xbfc03000 flash blocksize 0x1000 nocache 12 y 0xbfc03000 0x00000000 rw nocache I didn't see any ticket in the bug tracking system: http://sourceforge.net/apps/trac/openocd/ Does this work and I am just doing something wrong? If so, what? Thanks, Mindy ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
