This is an automated email from Gerrit. Marek Vasut ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/1460
-- gerrit commit 0dac5d34e1f66778fe2c834a1062fea08b341403 Author: Marek Vasut <[email protected]> Date: Fri Jun 28 02:27:07 2013 +0200 target: Pull out the jtag_rtck from iMX5x files Pull the jtag_rtck setting from imx51.cfg and imx53.cfg . Since not all boards using these CPUs do support RTCK signal, move the configuration of RTCK into board files. Change-Id: I632c5d38e00ada8779a451cd26428fd122452001 Signed-off-by: Marek Vasut <[email protected]> diff --git a/tcl/board/efikamx.cfg b/tcl/board/efikamx.cfg index f8ae25d..007b312 100644 --- a/tcl/board/efikamx.cfg +++ b/tcl/board/efikamx.cfg @@ -3,6 +3,7 @@ # Fall back to 6MHz if RTCK is not supported jtag_rclk 6000 +$_TARGETNAME configure -event "reset-start" { jtag_rclk 6000 } source [find target/imx51.cfg] diff --git a/tcl/board/icnova_imx53_sodimm.cfg b/tcl/board/icnova_imx53_sodimm.cfg index e37887e..aa6a148 100644 --- a/tcl/board/icnova_imx53_sodimm.cfg +++ b/tcl/board/icnova_imx53_sodimm.cfg @@ -17,6 +17,10 @@ echo "i.MX53 SO-Dimm board lodaded." adapter_khz 3000 +# Slow speed to be sure it will work +jtag_rclk 1000 +$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 } + $_TARGETNAME configure -event "reset-assert" { echo "Reseting ...." #cortex_a dbginit diff --git a/tcl/board/imx53loco.cfg b/tcl/board/imx53loco.cfg index 4c8a8da..06c3993 100644 --- a/tcl/board/imx53loco.cfg +++ b/tcl/board/imx53loco.cfg @@ -15,6 +15,10 @@ echo "iMX53 Loco board lodaded." adapter_khz 3000 +# Slow speed to be sure it will work +jtag_rclk 1000 +$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 } + #jtag_nsrst_delay 200 #jtag_ntrst_delay 200 diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg index 0ee388c..15d5c04 100644 --- a/tcl/target/imx51.cfg +++ b/tcl/target/imx51.cfg @@ -44,8 +44,4 @@ proc imx51_dbginit {target} { cortex_a dbginit } -# Slow speed to be sure it will work -jtag_rclk 1000 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 } - $_TARGETNAME configure -event reset-assert-post "imx51_dbginit $_TARGETNAME" diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg index 61fabc8..e77bc34 100644 --- a/tcl/target/imx53.cfg +++ b/tcl/target/imx53.cfg @@ -44,8 +44,4 @@ proc imx53_dbginit {target} { cortex_a dbginit } -# Slow speed to be sure it will work -jtag_rclk 1000 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 } - $_TARGETNAME configure -event reset-assert-post "imx53_dbginit $_TARGETNAME" -- ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
