|
Openocd version 0.7.0 current ST-LINK/V2 usb dongle Hi Folks The current release works ok with an STM32W108CB version with 128K Flash. A Rexense wireless module on a development board with JTag. With exactly the same setup it throws the following with an STM32W108CC version with 256K Flash. /openocd# ./openocd -f interface/stlink-v2.cfg -f target/stm32w108_stlink.cfg Open On-Chip Debugger 0.7.0 (2013-07-26-13:57) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Info : This adapter doesn't support configurable speed Info : STLINK v2 JTAG v15 API v2 SWIM v4 VID 0x0483 PID 0x3748 Info : Target voltage: 3.245115 Error: init mode failed in procedure 'transport' in procedure 'init' I have tried various changes to the stm32w108_stlink.cfg file but to no avail. I have tried with different STM32W hardware (development board and STM32W module) in case there was a problem there. A fix or workaround would be appreciated. Very best regards Ron --
R o n S e g a l MSc, CEng, ITCP  Wellington, New Zealand Tel: 64 4 5288806 Cell: 64 21 678009 This e-mail message and any attachments are confidential to the addressee(s). If you are not the intended addressee, please notify me as soon as possible and immediately delete the e-mail, including any attachments. Thank you. |
------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
