On 3 September 2013 01:09, Daniel Kowalski <kowal...@gmail.com> wrote: > Hello, > > Does OpenOCD supports flashing LPC111x chips from NXP? > I've read users manual and did not find apropriate driver. > > I will need to flash some of them in near future. They have UART > bootloader so it is possible without dedicated programmer, but I would > have to alter the application (UART is occupied with RS485 transmitter > connected to few other circuits), frequent reflashing during firware > development is a PITA in this configuration. I would prefer SWD (chips > do not support JTAG). > > If LPC111x are not supported, maybe I could contribute a little to > OpenOCD and add support. I skimmed through source code and it seems > that best place to start would be modification of lpc2000 or 2880 > drivers. > Has anybody here started playing with these chips and openocd? > Could You give me few pointers where to start? (I mean which code > sections I should read and understand before starting) > > I will have time for serious coding in last weeks of september and later > (first I have to deal with my 'almost-done' master's thesis) >
Not sure if this helps, i do not use lpc devices. But we have a pending change for the LPC800 on our review server - http://openocd.zylin.com/1509 Perhaps the devices are similar from a flash programming point if view? Cheers Spen ------------------------------------------------------------------------------ Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more! Discover the easy way to master current and previous Microsoft technologies and advance your career. Get an incredible 1,500+ hours of step-by-step tutorial videos with LearnDevNow. Subscribe today and save! http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
