> am new at subscribing, hope this goes thru... > > > > >> Hi >> >> ive been trying to setup openOCD for about a week now; got past >> problems with prerequisites, and here is what happens when trying >> to launch: >> >> gps2@ubuntu:~/openocd$ ./src/openocd -f gw16042.cfg -f gw2388.cfg >> Open On-Chip Debugger 0.8.0-dev-00193-gff12044-dirty (2013-09-26-12:34) >> Licensed under GNU GPL v2 >> For bug reports, read >> http://openocd.sourceforge.net/doc/doxygen/bugs.html >> Info : only one transport option; autoselect 'jtag' >> adapter speed: 1000 kHz >> trst_and_srst separate srst_gates_jtag trst_push_pull >> srst_open_drain connect_deassert_srst >> jtag_init >> Error: couldn't bind to socket: Address already in use >> gps2@ubuntu:~/openocd$ >> >> >> the jtag pod is a gw16042 and the target board is a gw2388 >> >> thanks for any advice >> > > >
------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
