>>>>> "Matthijs" == Matthijs Kooijman <[email protected]> writes:
Matthijs> Hi folks, I'm working with the AVR platform and have a device
Matthijs> that I can only program using JTAG. For this reason, I'd like
Matthijs> to get the AVR support in OpenOCD a bit more further along. As
Matthijs> far as I can see, only writing the flash is supported. I'm
Matthijs> interested in also reading flash and reading/writing fuse
Matthijs> bits, eeprom, lock bits, etc.
Matthijs> I'm happy to write some code for this, but I'm not sure what
Matthijs> the proper way to implement some of these is.
JAVR from the xc3sprog suite allows to program some AVR Devices I had access
to and some more. Perhaps have a look at it before you write anything new.
--
Uwe Bonnes [email protected]
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
