On Mon, Feb 24, 2014 at 11:05:31AM +0400, Paul Fertser wrote: > Hi, > > ajkroll on IRC asks for some feedback on jlink adapters, suspecting a > bug in OpenOCD code. Can anyone please state if jlink driver works > properly with the current code?
Best I can say is that a Micrium (STM32F107) worked for me with OOCD 0.7.0 but I needed to change tcl/target/stm32f1x.cfg -- commented out: cortex_m3 reset_config sysresetreq Before that it was failing to halt, with: Error: timed out while waiting for target halted TARGET: stm32f1x.cpu - Not halted John ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
