Hi, Please do not top-post in the future.
On Wed, Mar 05, 2014 at 11:57:52PM +0100, Angelo Dureghello wrote: > Could be an issue the fact i am not using JTRST cpu pin ? Unlikely, STM32s are known to be sane enough, and they do not really need TRST for anything. > I don't see any short or bad soldering, but i am suspecting that the cpu > has > some issue. Have you checked power supply for your target? Are you sure you've connected all Vcc and GND lines appropriately and the power is within the specs, no ripple etc? > Is there any command i could issue to understand better what's happening ? I'm afraid no, the issue starts to happen as soon as you see >>> Info : stm32f4x.cpu: hardware has 0 breakpoints, 0 watchpoints I think that's most likely a hardware issue. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
