Hi Paul. On Wed, 18 Jun 2014 19:35:45 +0400, Paul Fertser wrote: > On Wed, Jun 18, 2014 at 05:29:35PM +0200, Jens Bauer wrote: >> I'm beginning to see what happened. My 0.9.0 does not have ft2232, >> so I was forced to use interface/ftdi/*.cfg, which then does not by >> default support the SWD. So I'll need a few patches. > > ft2232 never supported SWD eiher.
I'm getting strange readings all over my face. ;) -I can't explain exactly how I had SWD and JTAG working with my files. >> I believe these are the relevant patches... >> http://openocd.zylin.com/#/c/2136/ >> http://openocd.zylin.com/#/c/1958/ > > I recommend http://openocd.zylin.com/#/c/2144 instead (just use the > whole branch, not single patch). Thank you very much. I just finished building it and get speeds like... LPC1751... jtag: 225 kHz; 3.929K/sec swd: 1800 kHz; 11.656K/sec LPC1788: jtag: 3000 kHz; 16.185K/sec ...Well... eh... That was fun raising the speed on JTAG for a while. Did I just brick my LPC1788 ? Love Jens ------------------------------------------------------------------------------ HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
