This is an automated email from Gerrit. Spencer Oliver ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/2330
-- gerrit commit c2559ef11b154dd1886f5b78b4af03956f169c2a Author: Spencer Oliver <[email protected]> Date: Fri Oct 3 09:24:38 2014 +0100 docs: Add supported targets/fix typo Change-Id: I48cd03b91f2e086453bb658121d0c352325523d8 Signed-off-by: Spencer Oliver <[email protected]> diff --git a/doc/openocd.texi b/doc/openocd.texi index 0b50c65..d926451 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -156,9 +156,10 @@ USB-based, parallel port-based, and other standalone boxes that run OpenOCD internally. @xref{Debug Adapter Hardware}. @b{GDB Debug:} It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, -ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M3 -(Stellaris LM3, ST STM32 and Energy Micro EFM32) and Intel Quark (x10xx) -based cores to be debugged via the GDB protocol. +ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M +(Stellaris LM3, ST STM32 and Energy Micro EFM32), Cortex-A (i.MX5, i.MX6, +OMAP3, OMAP4), MIPS (PIC32) and Intel Quark (x10xx) based cores to be +debugged via the GDB protocol. @b{Flash Programming:} Flash writing is supported for external CFI-compatible NOR flashes (Intel and AMD/Spansion command set) and several @@ -2902,7 +2903,7 @@ This is a write-once setting. Segger J-Link family of USB adapters. It currently supports JTAG and SWD transports. @quotation Compatibility Note -Segger released many firmware versions for the many harware versions they +Segger released many firmware versions for the many hardware versions they produced. OpenOCD was extensively tested and intended to run on all of them, but some combinations were reported as incompatible. As a general recommendation, it is advisable to use the latest firmware version -- ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
