Hello,
I'm debugging a custom board with a Freescale K60, and I'm running into a
problem I have never seen before with OpenOCD / GDB.
The K60 seems to be "freezing" under certain conditions in the lab, and when I
try to debug the problem, no exceptions seem to be hit. When I enter ^C in GDB
after it has frozen, OpenOCD times out trying to halt the target.
I am running OpenOCD 0.7.0, and I turn on vector_catch for all sources.
This is an infuriatingly vague question, any tips on what to try would be
helpful. Right now I'm dead in the water with no visibility.
Thanks,
Nick
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
