Hi Paul.

Thank you for the hints. :)

I've gotten a small step further now, because 'stm32f4x unlock 0' stops the 
initial demo-firmware from running (even after a power-cycle).

But I still get an error when trying to mass_erase ...
> halt
> stm32f4x unlock 0
stm32f2x unlocked.
INFO: a reset or power cycle is required for the new settings to take effect.
> stm32f4x mass_erase 0
stm32x device protected
stm32x mass erase failed
Runtime Error: embedded:startup.tcl:525: 
in procedure 'stm32f4x' 
in procedure 'stm32f2x' called at file "embedded:startup.tcl", line 525


Love
Jens

On Sun, 21 Dec 2014 10:14:00 +0300, Paul Fertser wrote:
> Hey,
> 
> On Sun, Dec 21, 2014 at 04:13:37AM +0100, Jens Bauer wrote:
>> I'm asking, because I'm having some strange problems, and I believe
>> that those problems are 'unique to me' (like always) :) I posted the
>> question on my.st.com's forum, as I thought it was very likely that
>> there are many discovery-board users there, and a few of them might
>> have had the problem too.  <https://my.st.com/ee76e9e1>
> 
> Assuming it's this [1]:
> 
>> openocd -f board/stm32f4discovery.cfg -c "program output/STM-test8.bin
>> verify reset"
> 
> This is obviously wrong as you flash a binary without specifying the
> offset, and it is 0 by default, so you get
> 
>> Warn : no flash bank found for address 0
> 
> The correct offset would be 0x08000000 in this case.
> 
>> Warn : STM32 flash size failed, probe inaccurate - assuming 1024k flash
>> Info : flash size = 1024kbytes
>> Error: stm32x device protected
>> Error: failed erasing sectors 0 to 0
> 
> This likely means you need to run
> 
>> stm32f4x unlock 0
> 
> once, and if that doesn't help,
> 
>> stm32f4x mass_erase 0
> 
> And then power-cycle. If it works, you'll be able to use "program" as
> usual as many times as you want, without these additional tricks. I
> recommend sticking to elf because openocd knows how to properly parse
> them, and uses correct offset automatically.
> 
> HTH
> 
> [1] 
> https://my.st.com/public/STe2ecommunities/mcu/Lists/STM32Discovery/Flat.aspx?RootFolder=%2fpublic%2fSTe2ecommunities%2fmcu%2fLists%2fSTM32Discovery%2fSTM32F4%20Discovery%20-%20can%27t%20flash-program%20device&FolderCTID=0x01200200770978C69A1141439FE559EB459D75800084C20D8867EAD444A5987D47BE638E0F&currentviews=30
> 
> --
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:fercer...@gmail.com

------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel

Reply via email to