Hi Andreas and Paul. On Sun, 18 Jan 2015 12:52:18 +0100, Jens Bauer wrote: > On Sun, 18 Jan 2015 12:40:03 +0100, Andreas Fritiofson wrote: >> You can use a config like http://openocd.zylin.com/2196 (but adapted >> for STM32F4) that sets this register when the chip is examined. > > This is very helpful. I've *got* to try this out! -Thank you so much! :)
Now, I've adapted the file, and was about to test it. But in order to make a test, I'd have to get the chip into this 'impossible' behaviour. So I wrote a small program, with the __WFI() in a loop, and ... It flash-programmed fine, even though I kept trying. "Hmm. I'll try the sources I used yesterday." ... Still working - "Argh". After messing around with it for another 10 minutes, I suddenly remembered that I did a checkout of patch 2467 and rebuild of OpenOCD, yesterday, right before getting recharged. I suspect that Paul's patch might could have fixed this issue (indirectly) ? Love Jens ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
