Debug: 865 9432 cortex_a.c:2283 cortex_a_read_apb_ab_memory(): Reading
APB-AP memory address 0xe1520001 size 1 count1
Debug: 866 9433 cortex_a.c:292 cortex_a_exec_opcode(): exec opcode
0xee100e15
Debug: 867 9433 cortex_a.c:292 cortex_a_exec_opcode(): exec opcode
0xe4d01001
Debug: 868 9434 cortex_a.c:292 cortex_a_exec_opcode(): exec opcode
0xee001e15
Error: 869 9434 cortex_a.c:2345 cortex_a_read_apb_ab_memory(): abort
occurred - dscr = 0x03086043
Does this abort mean anything to anyone? If I run the Segger/JLinkGDBServer
combo and then re-run my OpenOCD/Jlink combo everything is fine until I
power cycle the chip. What could Segger do that sets the chip up to prevent
this error from happening with subsequent OpenOCD runs?
Thanks,
- Mark
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
