On Tue, Feb 10, 2015 at 10:29:21PM +0200, Ran Shalit wrote: > >You can start openocd by specifying an adapter and adapter_khz and > >then connect via telnet and issue 'svf auto0.tap'... etc. > > I am using sysgpio interface. > Is the telnet connection relevant for sys gpio too ? With raspberraypi > .cfg file, I see no use of telnet connection.
Yes. Or you can add -c "init; svf ...; shutdown" command line option to the end of your invocation line. I recommend raspberrypi-native.cfg instead of sysfsgpio, it's much faster. But it doesn't matter, OpenOCD treats all the interfaces in the same way. Please read the official manual if in doubt. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
