Hi Jens :) On Thu, Feb 26, 2015 at 12:36:44PM +0100, Jens Bauer wrote: > On Thu, 26 Feb 2015 14:26:26 +0300, Paul Fertser wrote: > > On Thu, Feb 26, 2015 at 10:12:58AM +0100, Jens Bauer wrote: > >> Eh... It seems I have to issue that lpc2000 part_id 0 command, > >> before the bank is updated ? > > > > [...] once you try to write to the bank, it'll get auto-probed and will use > > the correct size. > > If I understand it correctly, that means 'flash banks' is missing an > "auto-probe if the device has not yet been probed" ?
Right, flash banks just prints all the defined flash banks, without calling any flash probe functions. I'm not sure if this is the correct behaviour or not, it seems nothing in the codebase currently depends on it, so probably worth enabling auto-probe in this case too. I never bothered about it because I always use "flash info (0|1|...)" to check if a flash driver is probing properly. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
