On Fri, Mar 13, 2015 at 10:32:10AM +0000, Chris Fryer wrote: > The "reset init" is in my openocd.cfg script. It's been there since I first > started using oocd in 2013. I've tried taking it out (see below. should I > replace it with just reset? or nothing at all?).
I do not think for a normal usecase any reset command should be in a config file. > Here's a log with 2596 applied with "reset init": It looks fine, and if you didn't have reset init there, you'd be able to call mdm mass_erase I think. If mdm check_security worked (and it did, judging by the message), so should mdm mass_erase too. > and with "reset init" removed: This run starts to differ even before the point "reset init" was attempted in the previous log. I suspect different hardware state. Please retry with reset init removed after power-cycling the part (and probably the debug adapter). -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
