Hi all. I've built OpenOCD 0.9.0-rc1 on Mac (and as some of you know, I've placed an installer here: http://openocd.gpio.dk/ ) I had no problems building the sources.
So far, I had no problems. I've tried the following targets: (All targets with JTAG-Lock-pick Tiny 2, except from the STM32F407 board) * LPC812 * LPC1114 * LPC1768 * LPC1788 * LPC4337 (see note) * STM32F407 with ST-Link v2 * STM32F427 * STM32F429 I had to supply WORKAREASIZE to some of my own .cfg files, but that's all. LPC4337 might fail sometimes; I might have time to investigate this later. (This could be due to a power supply, which is not strong enough, or missing capacitors). I did not succeed in flash-programming the LPC1342, but there have been problems with this chip earlier, so I'm not taking it too seriously. (I did manage to erase the program in it, while attempting to flash-program it, though). So I would say this is a success. It's no doubt the best OpenOCD on the Mac/PPC so far. Love Jens ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
