If we define additional banks in the kinetis configuration, we get to the
same issue that we had originally:
Error: ftfx command fialed FSTAT: A0 FCCOB: 0B000000 01000000 00000000
Error: error writing to flash at address 0x00000000 at offset 0x00000000
On Fri, May 15, 2015 at 6:43 PM, nothing fire <[email protected]> wrote:
> I am sorry, I misspoke. The error was not an unsupported CPU, it was that
> the kinestis configuration only defines one flash bank so that when we
> attempt to program it, the flash operation immediately fails.
>
> The gdb console indicates that it attempted to load the .text section and
> failed. When we use our custom make config it succeeds through loading all
> sections and only fails at the end with FSTAT.
>
> The openocd console indicates that there was a block write error, among
> others:
>
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x23000052, MEM_AP_TAR 0x40004
> Error: JTAG-DP STICKY ERROR
> Error: MEM_AP_CSW 0x23000052, MEM_AP_TAR 0x40004
> Warn : Block write error address 0x40000, wcount 0x400
>
> On Fri, May 15, 2015 at 6:29 PM, nothing fire <[email protected]>
> wrote:
>
>> Thank you for the quick response. The openocd executable provided with
>> the KDS seems to expect a CMSIS-DAP device and driver. We are using the
>> Olimex ARM USB OCD H pod to connect directly to the JTAG pins on our MCU.
>> I have tried modifying their scripts to use the Olimex driver instead, but
>> it gave me errors about the CPU not being supported so I did not think that
>> was the way to go. I will look into this more.
>>
>
>
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
