This is an automated email from Gerrit. Paul Fertser ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/2771
-- gerrit commit 648740334f01841098f215b06b57a129a85b0058 Author: Paul Fertser <[email protected]> Date: Sat May 16 10:18:19 2015 +0300 manual: fix usb_blaster_pin command syntax and description Change-Id: If3fbb2fe4f1842bea3962a6b903fd16aa9e8b545 Signed-off-by: Paul Fertser <[email protected]> diff --git a/doc/openocd.texi b/doc/openocd.texi index 57aac0a..6ce1d28 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2672,15 +2672,16 @@ usb_blaster_vid_pid 0x16C0 0x06AD @end example @end deffn -@deffn {Command} {usb_blaster} (@option{pin6}|@option{pin8}) (@option{0}|@option{1}) -Sets the state of the unused GPIO pins on USB-Blasters (pins 6 and 8 on the -female JTAG header). These pins can be used as SRST and/or TRST provided the -appropriate connections are made on the target board. +@deffn {Command} {usb_blaster_pin} (@option{pin6}|@option{pin8}) (@option{0}|@option{1}|@option{s}|@option{t}) +Sets the state or function of the unused GPIO pins on USB-Blasters +(pins 6 and 8 on the female JTAG header). These pins can be used as +SRST and/or TRST provided the appropriate connections are made on the +target board. -For example, to use pin 6 as SRST (as with an AVR board): +For example, to use pin 6 as SRST: @example -$_TARGETNAME configure -event reset-assert \ - "usb_blaster pin6 1; wait 1; usb_blaster pin6 0" +usb_blaster_pin pin6 s +reset_config srst_only @end example @end deffn -- ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
