- **status**: new --> closed
- **Comment**:
Lack of feedback, closing.
---
** [tickets:#88] STM32F030F4 device id 0x00000000 read**
**Status:** closed
**Milestone:** 0.9.0
**Created:** Fri Dec 26, 2014 12:46 AM UTC by Weinga-Unity
**Last Updated:** Sat Feb 28, 2015 03:29 PM UTC
**Owner:** nobody
I try to connect to a STM32F030F4 with the STM32F4-discovery board with via
SWD(CLK, Data, Reset). After 6 hours and no further hints from the internet i
create this ticket. Programming with ST-Link-Util works fine. Also reading
device id deliveres correct number.
Please, can you help me.
My cfg file:
=======================================================
source [find interface/stlink-v2.cfg]
source [find target/stm32f0x_stlink.cfg]
reset_config srst_only srst_nogate connect_assert_srst
GDB Commands after connection:
=======================================================
monitor reset init
load
monitor reset run
Output:
=======================================================
Open On-Chip Debugger 0.9.0-dev-00067-g2502d8a (2014-06-26-08:25)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Using:
hla_swd
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Info : This adapter doesn't support configurable speed
Info : STLINK v2 JTAG v21 API v2 SWIM v0 VID 0x0483 PID 0x3748
Info : using stlink api v2
Info : Target voltage: 2.905785
Info : stm32f0x.cpu: hardware has 4 breakpoints, 2 watchpoints
Info : accepting 'gdb' connection on tcp/3333
Info : device id = 0x00000000
Warn : Cannot identify target as a STM32 family.
Error: auto_probe failed
Error: Connect failed. Consider setting up a gdb-attach event for the target to
prepare target for GDB connect, or use 'gdb_memory_map disable'.
Error: attempted 'gdb' connection rejected
Log-Dump:
=======================================================
Debug: 102 578 command.c:366 register_command_handler(): registering 'ocd_stm32f
0x.cpu'...
Debug: 103 578 command.c:366 register_command_handler(): registering 'ocd_stm32f
0x.cpu'...
Debug: 104 594 command.c:366 register_command_handler(): registering 'ocd_stm32f
0x.cpu'...
Debug: 105 594 command.c:366 register_command_handler(): registering 'ocd_stm32f
0x.cpu'...
Debug: 106 609 command.c:366 register_command_handler(): registering 'ocd_stm32f
0x.cpu'...
Debug: 107 609 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_stm32f0x.cpu configure -work-area-phys 0x20000000 -work-area-size 0x1000
-work-area-backup 0
Debug: 108 625 command.c:145 script_debug(): command - ocd_stm32f0x.cpu ocd_stm3
2f0x.cpu configure -work-area-phys 0x20000000 -work-area-size 0x1000 -work-area-
backup 0
Debug: 109 641 target.c:1722 target_free_all_working_areas_restore(): freeing al
l working areas
Debug: 110 641 target.c:1722 target_free_all_working_areas_restore(): freeing al
l working areas
Debug: 111 656 target.c:1722 target_free_all_working_areas_restore(): freeing al
l working areas
Debug: 112 656 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_flash bank stm32f0x.flash stm32f1x 0 0 0 0 stm32f0x.cpu
Debug: 113 672 command.c:145 script_debug(): command - ocd_flash ocd_flash bank
stm32f0x.flash stm32f1x 0 0 0 0 stm32f0x.cpu
Debug: 116 672 command.c:366 register_command_handler(): registering 'ocd_stm32f
1x'...
Debug: 117 688 command.c:366 register_command_handler(): registering 'ocd_stm32f
1x'...
Debug: 118 688 command.c:366 register_command_handler(): registering 'ocd_stm32f
1x'...
Debug: 119 703 command.c:366 register_command_handler(): registering 'ocd_stm32f
1x'...
Debug: 120 703 command.c:366 register_command_handler(): registering 'ocd_stm32f
1x'...
Debug: 121 703 tcl.c:804 handle_flash_bank_command(): 'stm32f1x' driver usage fi
eld missing
Debug: 122 719 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_reset_config srst_only srst_nogate connect_assert_srst
Debug: 123 719 command.c:145 script_debug(): command - reset_config ocd_reset_co
nfig srst_only srst_nogate connect_assert_srst
User : 125 734 command.c:546 command_print(): srst_only separate srst_nogate srs
t_open_drain connect_assert_srst
Debug: 126 750 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_init
Debug: 127 766 command.c:145 script_debug(): command - init ocd_init
Debug: 129 766 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_target init
Debug: 130 781 command.c:145 script_debug(): command - ocd_target ocd_target ini
t
Debug: 132 781 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_target names
Debug: 133 781 command.c:145 script_debug(): command - ocd_target ocd_target nam
es
Debug: 134 797 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_stm32f0x.cpu cget -event gdb-flash-erase-start
Debug: 135 797 command.c:145 script_debug(): command - ocd_stm32f0x.cpu ocd_stm3
2f0x.cpu cget -event gdb-flash-erase-start
Debug: 136 813 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_stm32f0x.cpu configure -event gdb-flash-erase-start reset init
Debug: 137 828 command.c:145 script_debug(): command - ocd_stm32f0x.cpu ocd_stm3
2f0x.cpu configure -event gdb-flash-erase-start reset init
Debug: 138 828 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_stm32f0x.cpu cget -event gdb-flash-write-end
Debug: 139 844 command.c:145 script_debug(): command - ocd_stm32f0x.cpu ocd_stm3
2f0x.cpu cget -event gdb-flash-write-end
Debug: 140 844 command.c:145 script_debug(): command - ocd_command ocd_command t
ype ocd_stm32f0x.cpu configure -event gdb-flash-write-end reset halt
Debug: 141 859 command.c:145 script_debug(): command - ocd_stm32f0x.cpu ocd_stm3
2f0x.cpu configure -event gdb-flash-write-end reset halt
Debug: 142 859 target.c:1285 handle_target_init_command(): Initializing targets.
..
Debug: 143 875 hla_target.c:357 adapter_init_target(): adapter_init_target
Debug: 144 875 command.c:366 register_command_handler(): registering 'ocd_target
_request'...
Debug: 145 891 command.c:401 register_command(): command 'trace' is already regi
stered in '<global>' context
Debug: 146 891 command.c:366 register_command_handler(): registering 'ocd_trace'
...
Debug: 147 906 command.c:366 register_command_handler(): registering 'ocd_trace'
...
Debug: 148 906 command.c:366 register_command_handler(): registering 'ocd_fast_l
oad_image'...
Debug: 149 906 command.c:366 register_command_handler(): registering 'ocd_fast_l
oad'...
Debug: 150 922 command.c:366 register_command_handler(): registering 'ocd_profil
e'...
Debug: 151 922 command.c:366 register_command_handler(): registering 'ocd_virt2p
hys'...
Debug: 152 938 command.c:366 register_command_handler(): registering 'ocd_reg'..
.
Debug: 153 938 command.c:366 register_command_handler(): registering 'ocd_poll'.
..
Debug: 154 953 command.c:366 register_command_handler(): registering 'ocd_wait_h
alt'...
Debug: 155 953 command.c:366 register_command_handler(): registering 'ocd_halt'.
..
Debug: 156 969 command.c:366 register_command_handler(): registering 'ocd_resume
'...
Debug: 157 969 command.c:366 register_command_handler(): registering 'ocd_reset'
...
Debug: 158 984 command.c:366 register_command_handler(): registering 'ocd_soft_r
eset_halt'...
Debug: 159 984 command.c:366 register_command_handler(): registering 'ocd_step'.
..
Debug: 160 984 command.c:366 register_command_handler(): registering 'ocd_mdw'..
.
Debug: 161 1000 command.c:366 register_command_handler(): registering 'ocd_mdh'.
..
Debug: 162 1000 command.c:366 register_command_handler(): registering 'ocd_mdb'.
..
Debug: 163 1000 command.c:366 register_command_handler(): registering 'ocd_mww'.
..
Debug: 164 1016 command.c:366 register_command_handler(): registering 'ocd_mwh'.
..
Debug: 165 1016 command.c:366 register_command_handler(): registering 'ocd_mwb'.
..
Debug: 166 1031 command.c:366 register_command_handler(): registering 'ocd_bp'..
.
Debug: 167 1031 command.c:366 register_command_handler(): registering 'ocd_rbp'.
..
Debug: 168 1031 command.c:366 register_command_handler(): registering 'ocd_wp'..
.
Debug: 169 1047 command.c:366 register_command_handler(): registering 'ocd_rwp'.
..
Debug: 170 1047 command.c:366 register_command_handler(): registering 'ocd_load_
image'...
Debug: 171 1047 command.c:366 register_command_handler(): registering 'ocd_dump_
image'...
Debug: 172 1063 command.c:366 register_command_handler(): registering 'ocd_verif
y_image'...
Debug: 173 1063 command.c:366 register_command_handler(): registering 'ocd_test_
image'...
Debug: 174 1078 command.c:366 register_command_handler(): registering 'ocd_reset
_nag'...
Debug: 175 1078 command.c:366 register_command_handler(): registering 'ocd_ps'..
.
Debug: 176 1078 command.c:366 register_command_handler(): registering 'ocd_test_
mem_access'...
Debug: 177 1094 hla_interface.c:108 hl_interface_init(): hl_interface_init
Debug: 178 1094 hla_layout.c:85 hl_layout_init(): hl_layout_init
Info : 179 1094 core.c:1374 adapter_init(): This adapter doesn't support configu
rable speed
Debug: 180 1109 openocd.c:132 handle_init_command(): Debug Adapter init complete
Debug: 181 1109 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_transport init
Debug: 182 1125 command.c:145 script_debug(): command - ocd_transport ocd_transp
ort init
Debug: 184 1125 transport.c:240 handle_transport_init(): handle_transport_init
Debug: 185 1125 hla_transport.c:148 hl_transport_init(): hl_transport_init
Debug: 186 1141 hla_transport.c:165 hl_transport_init(): current transport hla_s
wd
Debug: 187 1141 hla_interface.c:44 hl_interface_open(): hl_interface_open
Debug: 188 1141 hla_layout.c:42 hl_layout_open(): hl_layout_open
Debug: 189 1156 stlink_usb.c:1593 stlink_usb_open(): stlink_usb_open
Debug: 190 1156 stlink_usb.c:1608 stlink_usb_open(): transport: 1 vid: 0x0483 pi
d: 0x3748
Info : 191 1781 stlink_usb.c:471 stlink_usb_version(): STLINK v2 JTAG v21 API v2
SWIM v0 VID 0x0483 PID 0x3748
Info : 192 1781 stlink_usb.c:1719 stlink_usb_open(): using stlink api v2
Debug: 193 1797 stlink_usb.c:653 stlink_usb_init_mode(): MODE: 0x02
Info : 194 1813 stlink_usb.c:503 stlink_usb_check_voltage(): Target voltage: 2.9
05785
Debug: 195 1813 stlink_usb.c:708 stlink_usb_init_mode(): MODE: 0x02
Debug: 196 1828 stlink_usb.c:734 stlink_usb_init_mode(): MODE: 0x02
Debug: 197 1844 stlink_usb.c:1758 stlink_usb_open(): Using TAR autoincrement: 10
24
Debug: 198 1844 hla_interface.c:129 hl_interface_execute_queue(): hl_interface_e
xecute_queue: ignored
Debug: 199 1859 core.c:716 jtag_add_reset(): SRST line asserted
Debug: 200 1859 core.c:744 jtag_add_reset(): TRST line released
Debug: 201 1875 core.c:324 jtag_call_event_callbacks(): jtag event: TAP reset
Debug: 202 1875 hla_interface.c:69 hl_interface_init_target(): hl_interface_init
_target
Debug: 203 1891 stlink_usb.c:759 stlink_usb_idcode(): IDCODE: 0x0BB11477
Debug: 204 1891 openocd.c:145 handle_init_command(): Examining targets...
Debug: 205 1906 target.c:1401 target_call_event_callbacks(): target event 21 (ex
amine-start)
Debug: 206 1906 hla_target.c:766 adapter_read_memory(): adapter_read_memory 0xe0
00ed00 4 1
Debug: 207 1922 target.c:2064 target_read_u32(): address: 0xe000ed00, value: 0x4
10cc200
Debug: 208 1922 cortex_m.c:1817 cortex_m_examine(): Cortex-M0 r0p0 processor det
ected
Debug: 209 1938 cortex_m.c:1818 cortex_m_examine(): cpuid: 0x410cc200
Debug: 210 1938 hla_target.c:766 adapter_read_memory(): adapter_read_memory 0xe0
002000 4 1
Debug: 211 1953 target.c:2064 target_read_u32(): address: 0xe0002000, value: 0x0
0000040
Debug: 212 1969 target.c:2152 target_write_u32(): address: 0xe0002008, value: 0x
00000000
Debug: 213 1969 hla_target.c:780 adapter_write_memory(): adapter_write_memory 0x
e0002008 4 1
Debug: 214 1984 target.c:2152 target_write_u32(): address: 0xe000200c, value: 0x
00000000
Debug: 215 2000 hla_target.c:780 adapter_write_memory(): adapter_write_memory 0x
e000200c 4 1
Debug: 216 2000 target.c:2152 target_write_u32(): address: 0xe0002010, value: 0x
00000000
Debug: 217 2016 hla_target.c:780 adapter_write_memory(): adapter_write_memory 0x
e0002010 4 1
Debug: 218 2031 target.c:2152 target_write_u32(): address: 0xe0002014, value: 0x
00000000
Debug: 219 2031 hla_target.c:780 adapter_write_memory(): adapter_write_memory 0x
e0002014 4 1
Debug: 220 2047 cortex_m.c:1863 cortex_m_examine(): FPB fpcr 0x40, numcode 4, nu
mlit 0
Debug: 221 2063 hla_target.c:766 adapter_read_memory(): adapter_read_memory 0xe0
001000 4 1
Debug: 222 2078 target.c:2064 target_read_u32(): address: 0xe0001000, value: 0x2
0000000
Debug: 223 2078 target.c:2152 target_write_u32(): address: 0xe0001028, value: 0x
00000000
Debug: 224 2094 hla_target.c:780 adapter_write_memory(): adapter_write_memory 0x
e0001028 4 1
Debug: 225 2094 target.c:2152 target_write_u32(): address: 0xe0001038, value: 0x
00000000
Debug: 226 2109 hla_target.c:780 adapter_write_memory(): adapter_write_memory 0x
e0001038 4 1
Debug: 227 2125 cortex_m.c:1774 cortex_m_dwt_setup(): DWT dwtcr 0x20000000, comp
2, watch/trigger
Info : 228 2125 cortex_m.c:1872 cortex_m_examine(): stm32f0x.cpu: hardware has 4
breakpoints, 2 watchpoints
Debug: 229 2141 target.c:1401 target_call_event_callbacks(): target event 22 (ex
amine-end)
Debug: 230 2141 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_flash init
Debug: 231 2156 command.c:145 script_debug(): command - ocd_flash ocd_flash init
Debug: 232 2156 log.c:422 keep_alive(): keep_alive() was not invoked in the 1000
ms timelimit (1484). This may cause trouble with GDB connections.
Debug: 235 2172 tcl.c:870 handle_flash_init_command(): Initializing flash device
s...
Debug: 236 2188 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 237 2188 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 238 2203 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 239 2203 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 240 2203 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 241 2219 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 242 2219 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 243 2234 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 244 2234 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 245 2250 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 246 2250 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 247 2250 command.c:366 register_command_handler(): registering 'ocd_flash
'...
Debug: 248 2266 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_mflash init
Debug: 249 2266 command.c:145 script_debug(): command - ocd_mflash ocd_mflash in
it
Debug: 251 2281 mflash.c:1379 handle_mflash_init_command(): Initializing mflash
devices...
Debug: 252 2281 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_nand init
Debug: 253 2297 command.c:145 script_debug(): command - ocd_nand ocd_nand init
Debug: 255 2297 tcl.c:497 handle_nand_init_command(): Initializing NAND devices.
..
Debug: 256 2313 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_pld init
Debug: 257 2313 command.c:145 script_debug(): command - ocd_pld ocd_pld init
Debug: 259 2313 pld.c:207 handle_pld_init_command(): Initializing PLDs...
Info : 260 7359 server.c:83 add_connection(): accepting 'gdb' connection on tcp/
3333
Debug: 261 7375 breakpoints.c:359 breakpoint_clear_target_internal(): Delete all
breakpoints for target: stm32f0x.cpu
Debug: 262 7375 breakpoints.c:499 watchpoint_clear_target(): Delete all watchpoi
nts for target: stm32f0x.cpu
Debug: 263 7391 target.c:1401 target_call_event_callbacks(): target event 23 (gd
b-attach)
Debug: 264 7391 hla_target.c:766 adapter_read_memory(): adapter_read_memory 0xe0
00ed00 4 1
Debug: 265 7406 target.c:2064 target_read_u32(): address: 0xe000ed00, value: 0x4
10cc200
Debug: 266 7406 hla_target.c:766 adapter_read_memory(): adapter_read_memory 0x40
015800 4 1
Debug: 267 7422 target.c:2064 target_read_u32(): address: 0x40015800, value: 0x0
0000000
Info : 268 7438 stm32f1x.c:868 stm32x_probe(): device id = 0x00000000
Warn : 269 7438 stm32f1x.c:943 stm32x_probe(): Cannot identify target as a STM32
family.
Error: 270 7438 core.c:217 get_flash_bank_by_num(): auto_probe failed
Error: 271 7438 gdb_server.c:976 gdb_new_connection(): Connect failed. Consider
setting up a gdb-attach event for the target to prepare target for GDB connect,
or use 'gdb_memory_map disable'.
Error: 272 7453 server.c:87 add_connection(): attempted 'gdb' connection rejecte
d
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
