Am 26.06.2015 um 16:53 schrieb Егор Егоров: > Hello! > > I am trying to upload 2 files from OpenOCD 9.0 via JTAG to D-Link > DIR-632 (AR7242) using load_image command: > > First file: >> load_image backup_uboot.bin 0x81000000 bin > Everything is ok, it uploads > > Immediately after first file: > Second file: >> load_image 8Muboot_RAM_version.bin 0x80000000 bin > Fastdata access Failed, falling back to non-bulk write > > > What does it mean? Why OpenOCD cannot use fast bulk mode anymore?
I assume some thing like ".. configure -work-area-phys ..". In second case you load image will overlap with working area, in this openocd will decide to fallow your wish but will need to disable bulk transfer. Bulk transfer depends on working-area. > Thank you? Welcome? > > ------------------------------------------------------------------------------ > Monitor 25 network devices or servers for free with OpManager! > OpManager is web-based network management software that monitors > network devices and physical & virtual servers, alerts via email & sms > for fault. Monitor 25 devices for free with no restriction. Download now > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o > > > > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel > -- Regards, Oleksij
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
