This is an incredible amount of information and help!
I will confirm with the seller what has he shipped.
Nordic documentation is expected to be up to date? Should I also start a
thread at Nordic?
On Jul 13, 2015 7:19 AM, "Angus Gratton" <[email protected]> wrote:
> On Sun, Jul 12, 2015 at 09:25:16PM +0530, Rupin Chheda wrote:
> > nrf51 mass_erase The terminal says Unknown device (HWID 0x00000057)
> >
> > Is this that the NRF51822 device is not recognised on the STLink is not
> > recognized?
>
> Hi Rupin,
>
> Openocd uses the "hardware id" reported from the NRF51's CONFIG
> registers to determine the flash size of the device.
>
> You can view the list of known hardware IDs in the source here:
>
> http://sourceforge.net/p/openocd/code/ci/master/tree/src/flash/nor/nrf51.c#l131
>
> (The current git master HEAD uses the same hardware id table as the
> v0.9.0 release.)
>
> HWID 0x0057 isn't listed there! I just checked the latest ATTN-51
> compatibility document from Nordic (there's a link to it in the source
> linked above) and it's not listed there either.
>
> Assuming the HWID is being read correctly (it probably is), it should
> be possible to add support for it - you just need to know what the
> flash size is, and ideally what the build code is, and then it can be
> added to that table.
>
> This isn't the first time otherwise undocumented HWIDs have cropped up
> in the wild!
>
> Cheers,
>
>
> Angus
>
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
