This is an automated email from Gerrit. Andreas Färber ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/3019
-- gerrit commit b838bd5781d41588c039c1b9035712ae4b61d7f1 Author: Andreas Färber <[email protected]> Date: Fri Oct 16 04:43:23 2015 +0200 doc: Fix sort order of flash drivers fm3, nrf, mdr, sim3x were added at the bottom rather than alphabetically. Change-Id: Id23e04749cdd3b25d7503ec00fac554742d48c77 Signed-off-by: Andreas Färber <[email protected]> diff --git a/doc/openocd.texi b/doc/openocd.texi index 21141ca..63bbf21 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5127,6 +5127,19 @@ flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME supported.} @end deffn +@deffn {Flash Driver} fm3 +All members of the FM3 microcontroller family from Fujitsu +include internal flash and use ARM Cortex M3 cores. +The @var{fm3} driver uses the @var{target} parameter to select the +correct bank config, it can currently be one of the following: +@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu}, +@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}. + +@example +flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME +@end example +@end deffn + @deffn {Flash Driver} lpc2000 This is the driver to support internal flash of all members of the LPC11(x)00 and LPC1300 microcontroller families and most members of @@ -5317,6 +5330,53 @@ lpc2900 secure_jtag 0 @end deffn @end deffn +@deffn {Flash Driver} mdr +This drivers handles the integrated NOR flash on Milandr Cortex-M +based controllers. A known limitation is that the Info memory can't be +read or verified as it's not memory mapped. + +@example +flash bank <name> mdr <base> <size> \ + 0 0 <target#> @var{type} @var{page_count} @var{sec_count} +@end example + +@itemize @bullet +@item @var{type} - 0 for main memory, 1 for info memory +@item @var{page_count} - total number of pages +@item @var{sec_count} - number of sector per page count +@end itemize + +Example usage: +@example +if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{ + flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \ + 0 0 $_TARGETNAME 1 1 4 +@} else @{ + flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \ + 0 0 $_TARGETNAME 0 32 4 +@} +@end example +@end deffn + +@deffn {Flash Driver} nrf51 +All members of the nRF51 microcontroller families from Nordic Semiconductor +include internal flash and use ARM Cortex-M0 core. + +@example +flash bank $_FLASHNAME nrf51 0 0x00000000 0 0 $_TARGETNAME +@end example + +Some nrf51-specific commands are defined: + +@deffn Command {nrf51 mass_erase} +Erases the contents of the code memory and user information +configuration registers as well. It must be noted that this command +works only for chips that do not have factory pre-programmed region 0 +code. +@end deffn + +@end deffn + @deffn {Flash Driver} ocl This driver is an implementation of the ``on chip flash loader'' protocol proposed by Pavel Chromy. @@ -5389,6 +5449,29 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @end deffn +@deffn {Flash Driver} sim3x +All members of the SiM3 microcontroller family from Silicon Laboratories +include internal flash and use ARM Cortex M3 cores. It supports both JTAG +and SWD interface. +The @var{sim3x} driver tries to probe the device to auto detect the MCU. +If this failes, it will use the @var{size} parameter as the size of flash bank. + +@example +flash bank $_FLASHNAME sim3x 0 $_CPUROMSIZE 0 0 $_TARGETNAME +@end example + +There are 2 commands defined in the @var{sim3x} driver: + +@deffn Command {sim3x mass_erase} +Erases the complete flash. This is used to unlock the flash. +And this command is only possible when using the SWD interface. +@end deffn + +@deffn Command {sim3x lock} +Lock the flash. To unlock use the @command{sim3x mass_erase} command. +@end deffn +@end deffn + @deffn {Flash Driver} stellaris All members of the Stellaris LM3Sxxx, LM4x and Tiva C microcontroller families from Texas Instruments include internal flash. The driver @@ -5681,89 +5764,6 @@ the flash clock. @end deffn @end deffn -@deffn {Flash Driver} fm3 -All members of the FM3 microcontroller family from Fujitsu -include internal flash and use ARM Cortex M3 cores. -The @var{fm3} driver uses the @var{target} parameter to select the -correct bank config, it can currently be one of the following: -@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu}, -@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}. - -@example -flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME -@end example -@end deffn - -@deffn {Flash Driver} sim3x -All members of the SiM3 microcontroller family from Silicon Laboratories -include internal flash and use ARM Cortex M3 cores. It supports both JTAG -and SWD interface. -The @var{sim3x} driver tries to probe the device to auto detect the MCU. -If this failes, it will use the @var{size} parameter as the size of flash bank. - -@example -flash bank $_FLASHNAME sim3x 0 $_CPUROMSIZE 0 0 $_TARGETNAME -@end example - -There are 2 commands defined in the @var{sim3x} driver: - -@deffn Command {sim3x mass_erase} -Erases the complete flash. This is used to unlock the flash. -And this command is only possible when using the SWD interface. -@end deffn - -@deffn Command {sim3x lock} -Lock the flash. To unlock use the @command{sim3x mass_erase} command. -@end deffn -@end deffn - -@deffn {Flash Driver} nrf51 -All members of the nRF51 microcontroller families from Nordic Semiconductor -include internal flash and use ARM Cortex-M0 core. - -@example -flash bank $_FLASHNAME nrf51 0 0x00000000 0 0 $_TARGETNAME -@end example - -Some nrf51-specific commands are defined: - -@deffn Command {nrf51 mass_erase} -Erases the contents of the code memory and user information -configuration registers as well. It must be noted that this command -works only for chips that do not have factory pre-programmed region 0 -code. -@end deffn - -@end deffn - -@deffn {Flash Driver} mdr -This drivers handles the integrated NOR flash on Milandr Cortex-M -based controllers. A known limitation is that the Info memory can't be -read or verified as it's not memory mapped. - -@example -flash bank <name> mdr <base> <size> \ - 0 0 <target#> @var{type} @var{page_count} @var{sec_count} -@end example - -@itemize @bullet -@item @var{type} - 0 for main memory, 1 for info memory -@item @var{page_count} - total number of pages -@item @var{sec_count} - number of sector per page count -@end itemize - -Example usage: -@example -if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{ - flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \ - 0 0 $_TARGETNAME 1 1 4 -@} else @{ - flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \ - 0 0 $_TARGETNAME 0 32 4 -@} -@end example -@end deffn - @section NAND Flash Commands @cindex NAND -- ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
