Hi Kent, On Wed, Oct 28, 2015 at 4:52 PM, Kent Brinkley <kent.brink...@imgtec.com> wrote: > Hi Yegor, > > I would suggest that you look at Bus Blaster v3c probe (Bus Blaster V3c for > MIPS Kit) available at Seeed > (http://www.seeedstudio.com/depot/Bus-Blaster-V3c-for-MIPS-Kit-p-2258.html). > The kit comes with the 14 pin EJTAG connector which you will need.
I already have Olimex ARM-USB-OCD-H (https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/) and I could successfully connect to AR9331 and load Barebox into RAM. So hardware is not an issue, but thanks for the hint. > -----Original Message----- > From: Yegor Yefremov [mailto:yegorsli...@googlemail.com] > Sent: Wednesday, October 28, 2015 12:22 AM > To: openocd-devel > Subject: [OpenOCD-devel] Meditek mt7620 support > > Hi all, > > does OpenOCD support such devices? So far I couldn't find such a target. > > I'd like to play with this device: > http://wiki.wrtnode.com/index.php?title=Starting and I feel safer, if I can > still use the system regardless of it's flash content. > > Thanks. > > Regards, > Yegor > > ------------------------------------------------------------------------------ > _______________________________________________ > OpenOCD-devel mailing list > OpenOCD-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
