Hi Paul. Thank you for the quick reply. :) -I guess I am a few years late on this one (so Rémi, you don't need to forward the previous email anyway). :D
Updating firmware on the ST-Link v2 is a bit difficult for me; I'd probably have to find a PC running Windows (perhaps on the public library). Love Jens On Fri, 19 Aug 2016 23:19:09 +0300, Paul Fertser wrote: > Hey Jens :) > > On Fri, Aug 19, 2016 at 09:26:47PM +0200, Jens Bauer wrote: >> -Rémi, can I ask you to forward this e-mail to the ST-Link v2 >> -firmware developers, so they will have a chance of finding the >> -error ? > > AFAIR, this was reported to be fixed in the latest firmware version > but it doesn't increment the version number, so the stlink update > utility will show that you have the same version but you need to > update anyway. Then you'll get the consistent serial numbers. The only > reliable way to specify them currently is to use > > openocd -d3 | hexdump -C > > to obtain the specific number. However, there's a patch: > http://openocd.zylin.com/#/c/2343/ > > HTH > -- > Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! > mailto:[email protected] ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
