WOO I got something
Open On-Chip Debugger 0.10.0-dev-00371-g81631e4 (2016-08-22-19:21)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
none separate
trst_and_srst separate srst_gates_jtag trst_push_pull srst_push_pull
connect_deassert_srst
Info : auto-selecting first available session transport "jtag". To
override use 'transport select <transport>'.
RCLK - adaptive
Info : RCLK (adaptive clock speed)
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
Info : JTAG tap: auto0.tap tap/device found: 0x4ba00477 (mfg: 0x23b (ARM
Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: auto1.tap tap/device found: 0x108100e1 (mfg: 0x070
(Qualcomm), part: 0x0810, ver: 0x1)
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -irlen 4 -expected-id
0x4ba00477"
Warn : AUTO auto1.tap - use "jtag newtap auto1 tap -irlen 11
-expected-id 0x108100e1"
Warn : gdb services need one or more targets defined
I'm excited!.... and I have no idea what this means.
Also I just broke off the resistor. F WORDS. I just spent the last hour
getting that thing on there.
On 08/22/2016 07:31 PM, J Mo wrote:
>
> Andreas, Jiri, thanks for your replies.
>
> You are correct that R33 and R15 are missing. I had read in a few
> places that TRST might not be needed, so I ignored it. If you are
> telling me it is needed, then I'll solder a resistor in.
>
> For R33, all of the others in that line are just conductor bridges, so
> I can glob it.
>
> R15 and it's line seem to be 10Kohm. I will look into soldiering on a
> resistor there, try again, and report back.
>
>
>
> On 08/22/2016 05:16 AM, Andreas Fritiofson wrote:
>> On some of the pictures it looks like R33 is not mounted and that it
>> disconnects the nTRST signal between the connector and the target
>> (the pull-up being on the connector side, so you'll measure the
>> correct voltage). I'd take a guess and say that nTRST pulled down on
>> the target side of R33 to disable JTAG.
>>
>
------------------------------------------------------------------------------
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
