This error:
Error: Could not initialize the debug port Comes from the CSYSPWRUPACK issue that changes #3124 or #3710 are attempting to solve. ________________________________ From: J Mo <[email protected]> Sent: Tuesday, August 23, 2016 6:20:50 PM To: Andreas Färber; [email protected] Subject: Re: [OpenOCD-devel] QCA IPQ8064 On 08/23/2016 03:55 PM, Andreas Färber wrote: > Just use the "UNEXPECTED" TAPID for the 2nd -expected-id line. > And I guess both should be ipq8064, not apq8064. Yes, thank you. I have corrected for that. Now I'm wondering why the scan seems to be dying before the end of the ROM table. Why would that happen? I'm reading up on things now to get my bearings, but this level of system stuff is all new to me. source /usr/local/share/openocd/scripts/interface/ftdi/tumpa.cfg reset_config trst_and_srst jtag_rclk 1000 jtag newtap ipq8064 dap -expected-id 0x4ba00477 -irlen 4 jtag newtap ipq8064 tap -expected-id 0x108100e1 -irlen 11 target create ipq8064.krait0 cortex_a -chain-position ipq8064.dap -coreid 0 ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
------------------------------------------------------------------------------
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
