On 05.10.2016 13:01, Augusto Fraga Giachero wrote:
If I remember correctly there was a problem with incorrect ID of a Kinetis MCU connected to ST-Link. I just changed ID in config and it worked. The bigger problem is that ST-Link is a high-level adapter and it prevent access to Kinetis MDM - so you loose functionality like mass erase or security lock checking. It is possible to wok without (until you accidentally lock the device).I'm involved in a project with a team. We only have the Multilink debugger (standalone, not the OpenSDA), and I thought that OpenOCD supported this adapter. I also have a STLINK-V2, but it didn't worked with the s9keaz128amlk microcontroller (it finds an incorrect ID). I've used the JLink adapter before with success on OpenOCD. Do you know why the STLINK-V2 wouldn't work with NXP KEA micros?
Tomas
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
