On Wed, Dec 28, 2016 at 4:44 PM, Freddie Chopin <[email protected]> wrote: > Hello! > > I've just uploaded Windows binaries (32-bit and 64-bit in the same > package) of OpenOCD-0.10.0-rc1 to my website. You can download it here: > > http://www.freddiechopin.info/ > Download > Software > OpenOCD dev > > openocd-0.10.0-rc1
Minor comments on "libusb-1.0 drivers.txt" file "libusb-1.0 drivers are required for: - ST-LINK - J-Link - FTx232 adapters You can install libusb-1.0 (WinUSB) drivers using zadig software from this link: http://zadig.akeo.ie/"; For ST-Link V2/V2-1, the vendor provided driver is already based on WinUSB and it should work with libusb Windows already without the need for Zadig. This is already mentioned in README.Windows file. http://repo.or.cz/openocd.git/blob/HEAD:/README.Windows I am also now so sure why you want to use libusb-win32 just for R-Link. It should work with WinUSB using libusb-1.0.dll as well. In that case, you can reduce one dependency on libusb-win32. -- Xiaofan ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
