I was just trying out the 0.10.0 Windows build of openocd
from www.freddiechopin.info and it seems that some jimtcl
commands are missing. Specifically I noticed that
"file" is not found.
--------
This is from the previous development build:
./openocd-0.10.0-dev-2/bin/openocd.exe \
-c 'puts [info commands f*]; file atime TESTFILE'
Open On-Chip Debugger 0.10.0-dev-00247-g73b676c (2016-03-12-15:04) ...
...
finalize {file copy} for {file delete force} flash function format
flush foreach fconfigure fileevent file find
...
1487147061
Error: Debug Adapter has to be specified, see "interface" command
--------
This is from the 0.10.0 build:
./openocd-0.10.0/bin/openocd.exe \
-c 'puts [info commands f*]; file atime TESTFILE'
Open On-Chip Debugger 0.10.0
...
function format finalize foreach {file copy} for {file delete force}
fileevent flash find
...
invalid command name "file"
--------
Freddie says that the Linux build produces the same "error":
> $ openocd -c 'puts [info commands f*]; file atime TESTFILE'
> Open On-Chip Debugger 0.10.0
> ...
> function format finalize foreach {file copy} for {file delete force}
> fileevent flash find
> ...
> invalid command name "file"
---
Mitch
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
