I mostly looked at the eCos implementation because it is fairly clean. I
took the fpu detection code (used to determine the stack layout) from
freertos.
Op do 2 mrt. 2017 23:51 schreef Steven Stallion <[email protected]>:
> I had a similar experience, though I was slowed down a little by fixing
> some other small issues elsewhere in OpenOCD. Out of curiosity Armin, which
> implementations did you use as an example?
>
> On Thu, Mar 2, 2017 at 4:46 PM, Armin van der Togt <[email protected]>
> wrote:
>
> I think it took me about three days. But I was completely unfamiliar with
> the openocd code, and I have not written the RTOS myself, so on both sides
> I had to do quite some digging to see how things are done.
> The code itself is pretty straight forward. There are about 5 functions
> that need to be implemented, and there are enough other implementations to
> take inspiration from. So... not too much work I would say, especially if
> you have written the RTOS yourself.
>
> Op do 2 mrt. 2017 23:21 schreef Freddie Chopin <[email protected]>:
>
> Hello Armin!
>
> A small off-topic...
>
> I would like to ask you how long did it take you to add support for a
> new RTOS to OpenOCD? I'm asking because I'm planning to add similar
> support for my project - http://distortos.org/ (similar in some aspects
> to what Liviu is doing) - and I was wondering how much work should I
> anticipate.
>
> Thanks in advance!
>
> Regards,
> FCh
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> OpenOCD-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/openocd-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
