> Please do not use ST-Link for NXP Kinetis flash programming. > > 1) It is quite easy to lock a Kinetis device into secure mode. > A high level adapter like ST-Link can not issue mass erase to unlock the > device. Thanks for the advice Tom. I ordered a CMSIS-DAP based adapter. Due to slow mail service where I live, I'm stuck with ST-Link/V2 for a while, so it would be nice to be able to erase the flash somehow. > 2) ST-Link unlike other adapters triggers a verify error on every clear > of a 'w1c' bit in a register (write one to clear). Also a write to other > registers > with some read-only bits can do the same. Any way to work around that? Is it possible to ignore the verify error and clear the memory?
Best regards, Florian ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
