> On 8 Jun 2017, at 14:07, Paul Fertser <[email protected]> wrote: > > On Thu, Jun 08, 2017 at 01:51:43PM +0300, Liviu Ionescu wrote: > >> there are many other FTDI applications out there (I have and use >> some) which rely on this standard behaviour. what do you think will >> happen to all these devices if I unload the FTDI kext? > > They won't be working during the debug session, granted, but will > start working after kext loading or OS restart.
sorry, but this is not an acceptable solution :-( > Serial port abstraction provided by an OS is certainly not adequate to > be able to talk MPSSE to the chip I think, so that's not an option. ah, right. I thought the programming pins are connected to the handshake/modem signals, which can be toggled, but if this is not the case, then it is not an option. > Plenty of people are using FTDI debug adapters on windows and OS X > already, as far as I know. poor them... regards, Liviu ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
