---
** [tickets:#162] DCC charmsg not working properly**
**Status:** new
**Milestone:** 0.9.0
**Created:** Wed Sep 06, 2017 02:16 PM UTC by José Ferreira
**Last Updated:** Wed Sep 06, 2017 02:16 PM UTC
**Owner:** nobody
Hi,
I have been trying to use the DCC function to receive debug text from a ARM
926EJ-S or a ARM 966E, but it seems not be functionly properly. I can flash the
devices, create breakpoints and use all the other tools
In an implementation of the ARM 926EJ-S, when I activate the "debugmsgs" to
"charmsg", I only get the first charater of every new line, in some cases I get
the second/third instead.
On an other implementation, I receive a big chunk of text with missing
characters when I activate the "charmsg".
I already tried with a couple of jtag adapters, ranging from a Raspberry Pi to
a BusBlaster.
The problems seems to be in the OpenOCD, because when I use a Lauterbach
debugger I can receive the text properly.
Is this a known issue that you expect to fix, if not can we solve it?
Or is it a problem on the type of jtag adapter / processor?
Best regards,
Jose Ferreira
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
