+1, i'm going to split and push osbdm part as draft in current state for review with you as author.
can you, please, all register on http://openocd.zylin.com for review? and if you have time, idle in #openocd @ freenode ? :) regarding e300/e500 cores, we should use mpcbdm as reference: http://www.erwinrol.com/mpc8xx-bdm-debugging-library/ http://www.erwinrol.com/wp-content/uploads/mpcbdm_v2.png notes JTAG/COP for MPC8620, which is probably typo - MPC8260, from samilar family powerquicc ii, while MPC83xx is powerquicc ii pro. some time ago, i compared debug chapters for all mpc82xx and mpc83xx and are almost same, similar are in qoriq p line (p1xxx and p2xxx - e500). so we can assume, that 603e/e300/e500 have similar debug model, maybe also ppc970 and hence ps3/xbox360. best regards jiri On Sat, Jan 13, 2018 at 08:05:31PM +0000, James Murray wrote: > On Sat, 2018-01-13 at 14:12 -0500, David Riley wrote: > > > It depends on the PPC; the ones that are unlikely to be supported > > > any > > time in OpenOCD are the e300 cores (e.g. MPC83xx series among > > others), which have a very different debug model which apparently > > involves boatloads of proprietary information. > > Fair point, I wasn't even aware of them as my focus is lower level > microcontrollers. > > regards > > James > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel
signature.asc
Description: PGP signature
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
