This is an automated email from Gerrit. Rohit Singh ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4363
-- gerrit commit ddd5a3471561cadf6e52b4508b2e23e66ce014ae Author: Rohit Singh <[email protected]> Date: Fri Jan 19 20:44:43 2018 +1100 tcl: Add support for the Digilent Arty board * https://reference.digilentinc.com/arty:refmanual * https://reference.digilentinc.com/_media/arty:arty_sch.pdf The Arty board has FTDI FT2232 whose channel A is connected to Artix-7 FPGA's JTAG pins, and can be supported by OpenOCD's ftdi interface. Tested to be working fine on real hardware. Change-Id: Ic70953e01790bad0dcad128dbd4fb5a501cf08ee Signed-off-by: Rohit Singh <[email protected]> diff --git a/tcl/board/digilent_arty.cfg b/tcl/board/digilent_arty.cfg new file mode 100644 index 0000000..317e7d2 --- /dev/null +++ b/tcl/board/digilent_arty.cfg @@ -0,0 +1,22 @@ +# +# Digilent Arty with Xilinx Artix-7 FPGA +# +# http://store.digilentinc.com/arty-artix-7-fpga-development-board-for-makers-and-hobbyists/ +# + +# iManufacturer 1 Digilent +# iProduct 2 Digilent USB Device +# iSerial 3 210319A28C7F + +interface ftdi +ftdi_device_desc "Digilent USB Device" +ftdi_vid_pid 0x0403 0x6010 +# channel 1 does not have any functionality +ftdi_channel 0 +# just TCK TDI TDO TMS, no reset +ftdi_layout_init 0x0088 0x008b +reset_config none +adapter_khz 10000 + +source [find cpld/xilinx-xc7.cfg] +source [find cpld/jtagspi.cfg] -- ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
