This is an automated email from Gerrit. Andreas Färber ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4370
-- gerrit commit d8d65c7baee72b4fd7dd288586d4ca9444edb835 Author: Andreas Färber <[email protected]> Date: Sun Jan 21 19:34:40 2018 +0100 tcl/target: Add NXP i.MX RT1050 Add config for NXP i.MX RT1050. Change-Id: I0dfe10047693d885625c1b14b301503deadf7803 Signed-off-by: Andreas Färber <[email protected]> diff --git a/tcl/target/imxrt1050.cfg b/tcl/target/imxrt1050.cfg new file mode 100644 index 0000000..c30c706 --- /dev/null +++ b/tcl/target/imxrt1050.cfg @@ -0,0 +1,35 @@ +# +# NXP i.MX RT1050 family (Arm Cortex-M7 @ 600 MHz) +# + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME imxrt1050 +} + +source [find target/swj-dp.tcl] + +if { [info exists CPU_SWD_TAPID] } { + set _CPU_SWD_TAPID $CPU_SWD_TAPID +} else { + set _CPU_SWD_TAPID 0x0bd11477 +} + +if { [using_jtag] } { + set _CPU_TAPID 0 +} else { + set _CPU_TAPID $_CPU_SWD_TAPID +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_TAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME + + +if { ![using_hla] } { + cortex_m reset_config sysresetreq +} + +adapter_khz 1000 -- ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
