This is an automated email from Gerrit. Oleksij Rempel ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4583
-- gerrit commit 65963ece2ecf4213febde55a335c7bbc5a4db915 Author: Oleksij Rempel <[email protected]> Date: Thu Jun 28 12:18:07 2018 +0200 tcl/target: Add Intel (Altera) Arria 10 target More information about this product can be found here: https://www.altera.com/products/fpga/arria-series/arria-10/overview.html Change-Id: Id78c741be6a8b7d3a70f37d41088e47ee61b437a Signed-off-by: Oleksij Rempel <[email protected]> diff --git a/tcl/target/altera_fpgasoc_arria10.cfg b/tcl/target/altera_fpgasoc_arria10.cfg new file mode 100644 index 0000000..c6ae3ea --- /dev/null +++ b/tcl/target/altera_fpgasoc_arria10.cfg @@ -0,0 +1,129 @@ +# Altera Arria10 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME arria10 +} + +# Arria10 has TDI -> UNKNOWN0 -> HPS -> FPGA -> TDO + +# Alter Max 10 id. What is it for? +if { [info exists UNKNOWN0_TAPID] } { + set _UNKNOWN0_TAPID $UNKNOWN0_TAPID +} else { + set _UNKNOWN0_TAPID 0x031830dd +} + +jtag newtap $_CHIPNAME unknown0 -irlen 10 -expected-id $_UNKNOWN0_TAPID + +# ARM CoreSight Debug Access Port (dap HPS) +if { [info exists DAP_TAPID] } { + set _DAP_TAPID $DAP_TAPID +} else { + set _DAP_TAPID 0x4ba00477 +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_DAP_TAPID + +# Subsidiary TAP: fpga (tap) +# See Intel Arria 10 Handbook +# https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/arria-10/a10_handbook.pdf +# Intel Arria 10 SX 660 - 0x02e050dd +if { [info exists FPGA_TAPID] } { + set _FPGA_TAPID $FPGA_TAPID +} else { + set _FPGA_TAPID 0x02e050dd +} +jtag newtap $_CHIPNAME.fpga tap -irlen 10 -expected-id $_FPGA_TAPID + +set _TARGETNAME $_CHIPNAME.cpu +# +# Cortex-A9 target +# +# Base addresses of cores: +# core 0 - 0x80110000 +# core 1 - 0x80112000 + +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu + +target create $_TARGETNAME.0 cortex_a -dap $_CHIPNAME.dap \ + -coreid 0 -dbgbase 0x80110000 +target create $_TARGETNAME.1 cortex_a -dap $_CHIPNAME.dap \ + -coreid 1 -dbgbase 0x80112000 -defer-examine +target smp $_TARGETNAME.0 $_TARGETNAME.1 + +# Arria10 helpers + +proc arria10_clear_registers { target } { + echo "Arria10 setup: $target" + set _OCM_END 0xfffbffff + reg r0 0 + reg r1 0 + reg r2 0 + reg r3 0 + reg r4 0 + reg r5 0 + reg r6 0 + reg r7 0 + reg r8 0 + reg r9 0 + reg r10 0 + reg r11 $_OCM_END + reg sp_svc $_OCM_END + reg lr_svc $_OCM_END + reg sp_abt $_OCM_END + reg lr_abt $_OCM_END + reg sp_und $_OCM_END + reg lr_und $_OCM_END +} + +proc arria10_disable_mmu_and_caches { target } { + # arm mcr pX op1 CRn CRm op2 value + echo "Disable MMU and caches" + # Invalidate caches + catch { + $target arm mcr 15 0 7 5 0 0 + $target arm mcr 15 0 7 7 0 0 + # Invalidate all TLBs + $target arm mcr 15 0 8 5 0 0 + $target arm mcr 15 0 8 6 0 0 + $target arm mcr 15 0 8 7 0 0 + $target arm mcr 15 4 8 3 0 0 + $target arm mcr 15 4 8 7 0 0 + set cp [$target arm mrc 15 0 1 0 0] + set mask [expr 1 << 29 | 1 << 12 | 1 << 11 | 1 << 2 | 1 << 1 | 1 << 0] + set cp [expr ($cp & ~$mask)] + $target arm mcr 15 0 1 0 0 $cp + } +} + +proc bootstrap { fname } { + global _TARGETNAME + + # To avoid code duplication, let the mini loader + # configure the RAM. So we need only to prepare the + # CPU, MMU and caches. Load boot code in to OCRAM + # and execute it. + arria10_clear_registers $_TARGETNAME.0 + arria10_disable_mmu_and_caches $_TARGETNAME.0 + # load code to OCRAM + load_image $fname 0xffe00000 + # start code from OCRAM + resume 0xffe00000 +} + +proc bringup { bitstream fname } { + global _CHIPNAME + global _TARGETNAME + + # before we can load boot loader on clean system, + # we should configure FPGA + svf -tap $_CHIPNAME.fpga.tap $bitstream progress + + targets $_TARGETNAME.0 + halt + + # Now we can start actual boot loader. + bootstrap $fname +} -- ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
